Actions

Firewall (IP Stations)

From Zenitel Wiki

Revision as of 13:42, 23 June 2017 by Asle (talk)
APS.png

All IP Stations have an embeded firewall.

  • Select Advanced Network > Firewall:
Firewall Settings


  • SSH [Turbine only]: Enable or disable SSH on station, disabled by default.
  • HTTP: Enable or disable HTTP on station, enabled by default.
  • HTTPS: Enable or disable HTTPS on station, enabled by default.
  • SIP (tcp) [Turbine only]: Enable or disable SIP over tcp on station, enabled by default.
  • SIPS [Turbine only]: Enable or disable SIPS on station, enabled by default.
  • Demo: Enable or disable DIP on station, disabled by default.
  • DIP: Enable or disable DIP on station, enabled by default.
  • TFTP Server: Enable or disable TFTP Server on station, enabled by default.
  • SNMP: Enable or disable SNMP on station, enabled by default.
  • SIP (udp): Enable or disable SIP over udp on station, enabled by default.
  • Pulse: Enable or disable Pulse on station, enabled by default.
  • mDNS: Enable or disable mDNS on station, enabled by default.
  • DIP Multicast: Enable or disable DIP Multicast on station, enabled by default.
  • Discovery: Enable or disable Discovery on station, enabled by default.
  • Zap [Turbine only]: Enable or disable ZAP on station, enabled by default.
  • ZapWeb [Turbine only]: Enable or disable ZapWeb on station, enabled by default.
  • VoIP: Enable or disable VoIP on station, enabled by default.
NOTE: VoIP port range is configurable only if station is in SIP mode.