Difference between revisions of "Group call feature"
From Zenitel Wiki
Line 23: | Line 23: | ||
|} | |} | ||
− | + | {{Note|In a system with IP Stations, maximum '''50''' stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, group calls must use multicast. (AlphaPro: Exchange & System -> System -> VoIP tab -> Enable "Multicast"). See also: [[Multicast_in_AlphaCom]]}} | |
[[AlphaCom Feature List|Back to feature list]] | [[AlphaCom Feature List|Back to feature list]] |
Revision as of 14:45, 25 February 2022
Feature: | Group call |
Default directory number: | 84-88, 890-899 |
Feature number: | 39 |
Parameter 1: | 1-250 = Group index number |
Parameter 2: | PA Control Bitmap: Control Bitmap |
Parameter 3: | 0 = Dynamic multicast port/address (default). 1-255 = static port/address. (From 13.1.3.0)
Example Param3 = 50 with default IP settings and Node number 1:
|
Description: | Group call (voice paging) to a group of stations. Dial group number and press M-key to talk. |
In a system with IP Stations, maximum 50 stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, group calls must use multicast. (AlphaPro: Exchange & System -> System -> VoIP tab -> Enable "Multicast"). See also: Multicast_in_AlphaCom |