Difference between revisions of "HTTP string: Send from AlphaCom"
From Zenitel Wiki
(→Create Event) |
(→Set up EDO port) |
||
| Line 4: | Line 4: | ||
===Set up EDO port=== | ===Set up EDO port=== | ||
''"System"'' -> ''"Serial Ports"'' -> ''Configure EDIO port'' | ''"System"'' -> ''"Serial Ports"'' -> ''Configure EDIO port'' | ||
| + | <br><br> | ||
| + | Port-Type: TCP/IP Client | ||
| + | IP-Address: destination IP | ||
| + | Port: destination port, usually 80 when HTTP. | ||
| + | Keep-Alive: off | ||
<br> | <br> | ||
[[File:EDIO-port.png]] | [[File:EDIO-port.png]] | ||
Revision as of 11:58, 5 September 2017
HTTP GET via EDO Port
You can send HTTP GET to third-party systems using EDO ports and Event Handler.
Set up EDO port
"System" -> "Serial Ports" -> Configure EDIO port
Port-Type: TCP/IP Client
IP-Address: destination IP
Port: destination port, usually 80 when HTTP.
Keep-Alive: off
Create Event
Use EDO command to send HTTP GET on the configured port.
EDO 1 "GET /triggerevent?variable1=test1&variable2=test2 HTTP/1.1\r\nHost: 10.5.101.110\r\nConnection: Keep-Alive\r\n" EDO 1 "Accept: */*\r\n\r\n"