Difference between revisions of "HTTP string: Send from AlphaCom"
From Zenitel Wiki
(→Create Event) |
(→Create Event) |
||
| Line 13: | Line 13: | ||
===Create Event=== | ===Create Event=== | ||
| − | Use EDO command to send HTTP GET on the configured port. | + | Use EDO command to send HTTP GET on the configured port. |
| + | <br> | ||
| + | Example using DAK 1 to send HTTP GET: | ||
<br> | <br> | ||
[[File:Event-http-string.png]] | [[File:Event-http-string.png]] | ||
Revision as of 14:10, 5 September 2017
HTTP GET via EDO Port
You can send HTTP GET to third-party systems using EDO ports and Event Handler.
Set up EDO port
"System" -> "Serial Ports" -> Configure EDIO port
Port-Type: TCP/IP Client
IP-Address: destination IP
Port: destination port, usually 80 when HTTP.
Keep-Alive: off
Create Event
Use EDO command to send HTTP GET on the configured port.
Example using DAK 1 to send HTTP GET:
EDO 1 "GET /triggerevent?variable1=test1&variable2=test2 HTTP/1.1\r\nHost: 10.5.101.110\r\nConnection: Keep-Alive\r\n" EDO 1 "Accept: */*\r\n\r\n"
There is a max-limit of 128 characters on EDIO ports, so if string exceeds this the command needs to be split up.