Actions

Difference between revisions of "Hotline Call"

From Zenitel Wiki

(Hotline Call)
Line 1: Line 1:
=== Hotline Call ===
+
'''Hotline Call'''
 +
== Hotline Call ==
 
Enable the [[Hot-line Dialing|hotline]] function by selecting the hotline station in the listbox in '''Users & Stations''', select the '''Station Type''' tab, and check the '''Hotline''' flag:
 
Enable the [[Hot-line Dialing|hotline]] function by selecting the hotline station in the listbox in '''Users & Stations''', select the '''Station Type''' tab, and check the '''Hotline''' flag:
  
Line 15: Line 16:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
=== Hotline Call Delay ===
+
== Hotline Call Delay ==
 
By default there is a 5.0 second delay from the handset is lifted until the call is placed. Often you want the call to be placed immediately. To change the delay time, select '''Exchange & System''', '''System''', '''Calls and Options'''.
 
By default there is a 5.0 second delay from the handset is lifted until the call is placed. Often you want the call to be placed immediately. To change the delay time, select '''Exchange & System''', '''System''', '''Calls and Options'''.
 
[[File:HotlineCallDelay.PNG|thumb|left|500px|Default hotline delay is 5.0 sec. Change from 50 to 0 for immediate call]]
 
[[File:HotlineCallDelay.PNG|thumb|left|500px|Default hotline delay is 5.0 sec. Change from 50 to 0 for immediate call]]

Revision as of 09:16, 30 August 2018

Hotline Call

Hotline Call

Enable the hotline function by selecting the hotline station in the listbox in Users & Stations, select the Station Type tab, and check the Hotline flag:

Enable the Hotline Call flag



In Users & Stations, select the DAK button, and enter the call destination on DAK 7:

Call station 321 when lifting the handset


If the hotline call should generate a Call Request instead, enter "I 623 I xxx" on DAK 7, where xxx is the target station. If the Call Request should be cleared when replacing the handset, enter "I626 I xxx" on DAK 8, else leave DAK 8 blank.

Send Call Request to station 101 when lifting the handset, delete the Call request when replacing the handset


Hotline Call Delay

By default there is a 5.0 second delay from the handset is lifted until the call is placed. Often you want the call to be placed immediately. To change the delay time, select Exchange & System, System, Calls and Options.

Default hotline delay is 5.0 sec. Change from 50 to 0 for immediate call


Related Article: Hot-line Dialing