Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki

(Created page with "== Restore to Factory Default for IP Stations with Display == This procedure is the recommended procedure for all IP Stations with Display. IP Stations with Display includes:...")
 
(Restore to Factory Default for IP Stations with Display)
Line 1: Line 1:
== Restore to Factory Default for IP Stations with Display ==
 
 
This procedure is the recommended procedure for all IP Stations with Display. IP Stations with Display includes:
 
This procedure is the recommended procedure for all IP Stations with Display. IP Stations with Display includes:
 
* IP Flush Master - [[IP Flush Master - 1008031000|1008031000]]
 
* IP Flush Master - [[IP Flush Master - 1008031000|1008031000]]

Revision as of 10:01, 19 October 2016

This procedure is the recommended procedure for all IP Stations with Display. IP Stations with Display includes:

The procedure can also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.

The Station Menu is only available when the IP Station is in offline mode.

  • Make sure the IP Station is disconnected from the AlphaCom XE exchange.
  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

The station will now restart with factory settings.