Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki
Line 14: Line 14:
  
 
The station will now restart with factory settings.
 
The station will now restart with factory settings.
 +
 +
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Revision as of 11:05, 19 October 2016

This procedure is the recommended procedure for all IP Stations with Display. The procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.

The Station Menu is only available when the IP Station is in offline mode.

  • Make sure the IP Station is disconnected from the AlphaCom XE exchange.
  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

The station will now restart with factory settings.

Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_Display_Station_Restore_Factory_Defaults&oldid=146038"