Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki

Line 2: Line 2:
  
 
* The Station Menu is available in both Pulse and SIP mode. <br/>  
 
* The Station Menu is available in both Pulse and SIP mode. <br/>  
* In Alphacom mode it is only available when the IP Station is offline mode. i.e. not registered to the server.
+
* In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
  
 
'''See video:'''
 
'''See video:'''

Revision as of 13:21, 15 May 2018

APS.png

This procedure is the recommended procedure for all IP Stations with Display.

  • The Station Menu is available in both Pulse and SIP mode.
  • In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.

See video:



Procedure

  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

Factory default values

The station will now restart with factory settings:

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin
Note icon This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.