Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki

 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
This procedure is the recommended procedure for all IP Stations with Display.
+
{{AEIPS}}This procedure is the recommended procedure for all IP Stations with Display.
  
The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.
+
* The Station Menu is available in both Edge, Pulse and SIP mode. <br/>
 +
* In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
  
The [[IP Dual Display Station - 1008007000|IP DualDisplay]] station can also be restored through an [[INCA_Station_Restore_Factory_Defaults|alternative procedure]].
+
'''See video:'''
 +
<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
 +
<br><br>
  
The Station Menu is only available when the IP Station is in offline mode.
+
==Procedure ==
* Make sure the IP Station is disconnected from the AlphaCom XE exchange.
 
 
* Press the '''Setup''' button beneath the display  
 
* Press the '''Setup''' button beneath the display  
 
* Enter the password '''1851''' and press the '''Ok''' button.
 
* Enter the password '''1851''' and press the '''Ok''' button.
Line 16: Line 18:
 
|}
 
|}
  
The station will now restart with factory settings.
+
== Factory default values ==
 +
The station will now restart with factory settings:
 +
*Station Mode: '''Pulse'''
 +
*Station IP address: '''169.254.1.100'''
 +
*Username: '''admin'''
 +
*Password: '''alphaadmin'''
 +
 
 +
{{note|This procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.}}
 +
 
  
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 07:35, 24 October 2019

AEIPS.png

This procedure is the recommended procedure for all IP Stations with Display.

  • The Station Menu is available in both Edge, Pulse and SIP mode.
  • In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.

See video:



Procedure

  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

Factory default values

The station will now restart with factory settings:

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin
Note icon This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.