Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki

 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{APS}}This procedure is the recommended procedure for all IP Stations with Display.
+
{{AEIPS}}This procedure is the recommended procedure for all IP Stations with Display.
  
The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.
+
* The Station Menu is available in both Edge, Pulse and SIP mode. <br/>
 +
* In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
  
* Make sure the IP Station is disconnected from the AlphaCom XE exchange.
+
'''See video:'''
 +
<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
 +
<br><br>
 +
 
 +
==Procedure ==
 
* Press the '''Setup''' button beneath the display  
 
* Press the '''Setup''' button beneath the display  
 
* Enter the password '''1851''' and press the '''Ok''' button.
 
* Enter the password '''1851''' and press the '''Ok''' button.
Line 13: Line 18:
 
|}
 
|}
  
 +
== Factory default values ==
 
The station will now restart with factory settings:
 
The station will now restart with factory settings:
 
*Station Mode: '''Pulse'''
 
*Station Mode: '''Pulse'''
Line 20: Line 26:
  
 
{{note|This procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.}}
 
{{note|This procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.}}
 
'''See video:'''
 
<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
 
<br><br>
 
  
  
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 07:35, 24 October 2019

AEIPS.png

This procedure is the recommended procedure for all IP Stations with Display.

  • The Station Menu is available in both Edge, Pulse and SIP mode.
  • In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.

See video:



Procedure

  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

Factory default values

The station will now restart with factory settings:

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin
Note icon This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.