Actions

Difference between revisions of "INCA Display Station Restore Factory Defaults"

From Zenitel Wiki

Line 12: Line 12:
 
|}
 
|}
  
The station will now restart with factory settings.
+
The station will now restart with factory settings:
 +
*Station Mode: '''Pulse'''
 +
*Station IP address: '''169.254.1.100'''
 +
*Username: '''admin'''
 +
*Password: '''alphaadmin'''
  
 
  The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.
 
  The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.

Revision as of 13:04, 17 March 2017

APS.png

This procedure is the recommended procedure for all IP Stations with Display.

The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.

  • Make sure the IP Station is disconnected from the AlphaCom XE exchange.
  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

The station will now restart with factory settings:

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin
The procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.