INCA Display Station Restore Factory Defaults
From Zenitel Wiki
Revision as of 08:35, 24 October 2019 by Asle
This procedure is the recommended procedure for all IP Stations with Display.
- The Station Menu is available in both Edge, Pulse and SIP mode.
- In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
- Press the Setup button beneath the display
- Enter the password 1851 and press the Ok button.
- Navigate to Load defaults and press the Sel button.
- Press the Sel button to load factory defaults.
Factory default values
The station will now restart with factory settings:
- Station Mode: Pulse
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin
|This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.|