Difference between revisions of "INCA Substation LED Indicators"
From Zenitel Wiki
(→LAN LEDs) |
(→Status LED) |
||
| Line 27: | Line 27: | ||
* Station connected and registered to the AlphaCom XE Audio Server | * Station connected and registered to the AlphaCom XE Audio Server | ||
* Station not powered up (if no other LEDs are active) | * Station not powered up (if no other LEDs are active) | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===LAN LEDs=== | ===LAN LEDs=== | ||
Revision as of 11:47, 26 October 2016
Station LED
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)
LAN LEDs
Left LED:
- Steady light: Ethernet connection OK
- Blinking: Ethernet traffic
- No light: No Ethernet connection
Right LED:
- Light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection