Difference between revisions of "INCA Substation LED Indicators"
From Zenitel Wiki
(→8022 - IP Substation) |
(→Station LED) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | ===Station LED=== |
| + | {| | ||
| + | |[[File:IP Substation Indication 1.PNG|thumb|200px|IP Substation LED]] | ||
| + | |[[File:IP Substation Indication 2.PNG|thumb|200px|IP Substation (3gang) LED]] | ||
| + | |} | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | '''Blinking at 1 second intervals:'''<br> | |
| − | + | Station cannot register to the server/controller | |
Possible reasons: | Possible reasons: | ||
| − | + | * Invalid network settings (IP address and network mask) in the device | |
| − | + | * Wrong or missing account settings (Server IP, directory number, password..) | |
| − | + | * Failing to register due to missing license in the server | |
| − | + | * The server is offline | |
| + | * Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP) | ||
| + | If the server is on a different subnet, check that | ||
| + | * A valid Default gateway is defined | ||
| − | + | '''No blinking:''' | |
| − | |||
| − | + | Possible reasons: | |
| − | + | * Station connected and registered to the server/controller | |
| − | + | * Station not powered up (if no other LEDs are active) | |
| − | + | '''Blinking at 5 second intervals:'''<br/> | |
| + | {{Note| This LED behaviour only applies in ICX-AlphaCom mode}} | ||
| + | Station connected but NOT registered in the ICX-AlphaCom | ||
Possible reasons: | Possible reasons: | ||
| − | + | * Station has not been programmed in AlphaPro | |
| − | + | * Missing IP Station license in ICX-AlphaCom | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | [[Category:Station Indication LEDs]] | |
| − | [[ | ||
| − | |||
| − | |||
| − | |||
Latest revision as of 12:44, 20 November 2020
Station LED
Blinking at 1 second intervals:
Station cannot register to the server/controller
Possible reasons:
- Invalid network settings (IP address and network mask) in the device
- Wrong or missing account settings (Server IP, directory number, password..)
- Failing to register due to missing license in the server
- The server is offline
- Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
If the server is on a different subnet, check that
- A valid Default gateway is defined
No blinking:
Possible reasons:
- Station connected and registered to the server/controller
- Station not powered up (if no other LEDs are active)
Blinking at 5 second intervals:
|
This LED behaviour only applies in ICX-AlphaCom mode |
Station connected but NOT registered in the ICX-AlphaCom
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in ICX-AlphaCom