Difference between revisions of "INCA Video Doorstation LED Indicators"

Latest revision as of 12:44, 20 November 2020

Station LED

The Station LED is integrated into the call button on the IP Video Doorstation.

IP Video Doorstation LED

Blinking at 1 second intervals:
Station cannot register to the server/controller

Possible reasons:

Invalid network settings (IP address and network mask) in the device
Wrong or missing account settings (Server IP, directory number, password..)
Failing to register due to missing license in the server
The server is offline
Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)

If the server is on a different subnet, check that

A valid Default gateway is defined

No blinking:

Possible reasons:

Station connected and registered to the server/controller
Station not powered up (if no other LEDs are active)

Blinking at 5 second intervals:

This LED behaviour only applies in ICX-AlphaCom mode

Station connected but NOT registered in the ICX-AlphaCom

Possible reasons:

Station has not been programmed in AlphaPro
Missing IP Station license in ICX-AlphaCom

@@ Line 7: / Line 7: @@
 <br style="clear:both;" />
 '''Blinking at 1 second intervals:'''<br>
-Station has no connection to the AlphaCom XE Audio Server.
+Station cannot register to the server/controller
 Possible reasons:
-* No connection to Ethernet
+* Invalid network settings (IP address and network mask) in the device
-* Wrong AlphaCom IP address configured
+* Wrong or missing account settings (Server IP, directory number, password..)
-* Invalid IP address
+* Failing to register due to missing license in the server
-* No gateway or wrong gateway to the AlphaCom XE Audio Server
+* The server is offline
+* Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
-'''Blinking at 5 second intervals:'''<br>
+If the server is on a different subnet, check that
-Station connected but NOT registered in the AlphaCom XE Audio Server.
+* A valid Default gateway is defined
-Possible reasons:
-* Station has not been programmed in AlphaPro
-* Missing IP Station license in AlphaCom XE Audio Server
 '''No blinking:'''<br>
 Possible reasons:
-* Station connected and registered to the AlphaCom XE Audio Server
+* Station connected and registered to the server/controller
 * Station not powered up (if no other LEDs are active)
-===Status LED===
+'''Blinking at 5 second intervals:'''<br/>
-Bicolor SMD LED on board component side.
+{{Note| This LED behaviour only applies in ICX-AlphaCom mode}}
-[[File:IPSub Indications 1.png|left|thumb|300px|Status LED]]
+Station connected but NOT registered in the ICX-AlphaCom
-<br style="clear:both;" />
-'''Blinking 2 red + 1 green:''' <br>
+Possible reasons:
-* Station has no connection to the AlphaCom XE Audio Server.
+* Station has not been programmed in AlphaPro
+* Missing IP Station license in ICX-AlphaCom
-'''Blinking 1 red + 2 green:'''<br>
-* Station connected but NOT registered in the AlphaCom XE Audio Server.
-'''Blinking 3 green:'''<br>
-* Station connected and registered in the AlphaCom XE Audio Server.
-===LAN LEDs===
-'''Left LED:'''<br>
-[[File:IP Substation Indication 4.PNG|left|thumb|200px|Left LED]]
-<br style="clear:both;" />
-* Steady light:  Ethernet connection OK
-* Blinking:     Ethernet traffic
-* No light:    No Ethernet connection
-'''Right LED:'''<br>
-[[File:IP Substation Indication 5.PNG|left|thumb|200px|Right LED]]
-<br style="clear:both;" />
-* Light:    100 Mbit Ethernet connection
-* No light:  10 Mbit Ethernet connection
-[[Category:INCA Indication LEDs]]
+[[Category:Station Indication LEDs]]

Difference between revisions of "INCA Video Doorstation LED Indicators"

From Zenitel Wiki

Latest revision as of 12:44, 20 November 2020

Station LED