IND - Indicator control for CRMIV LEDs, buzzer etc.

Syntax

IND  <phys.no>  <key.no>  <led.no/buzzer>  <ind-type>  [ON/OFF]

phys.no:

• 1-552 = The physical number of the station

key.no:

• 1-100 = The key number of the DAK-key
  
• 1023 = Buzzer
• 1024 = Display

led.no/buzzer:

If the previous parameter was DAK-key (1 - 100):

• 1 = Red LED
• 2 = Green LED

If the previous parameter was Buzzer (1023):

• 1 = Internal buzzer
• 2 = External buzzer (relay)

If the previous parameter was Display (1024):

• 1 = Backlight

ind-type:

LEDs and display:

1 = continuous (low priority) 2 = slow flash (medium priority) 3 = fast flash (high priority)

Buzzers:

• 1 = 1 bleep per 8 seconds (low priority)
• 2 = 1 bleep per 2 seconds (medium priority)
• 3 = 4 bleeps per second (high priority)
• 4 = continuous (alarm priority)

[state] OFF or ON (capital letters) The brackets [ ] indicate that this command is optional. If nothing is entered in this field, the indication is switched on/off along with the event. By entering OFF, for example, you can set an indication to turn off when the event turns on.

Example

IND  2  23  2  3  ON – Station 2, key 23, turn green led, fast flashing, ON