IND - Indicator control for CRMIV LEDs, buzzer etc.

Syntax

IND  <phys.no>  <key.no>  <led.no/buzzer>  <ind-type>  [ON/OFF]

phys.no: 1-552 = The physical connection for the CRM IV station you are programming

key.no: 1-100 = Single-touch keys See drawing on the next page for details
1023 = Buzzer 1024 = Display

led.no: Single-touch keys Buzzer Display
1 = Red LED 1 = Internal buzzer 1 = Backlight 2 = Green LED 2 = External buzzer (relay)

ind-type: LEDs and display: Buzzers 1 = continuous (low priority) 1 = 1 bleep per 8 seconds (low priority) 2 = slow flash (medium priority) 2 = 1 bleep per 2 seconds (medium priority) 3 = fast flash (high priority) 3 = 4 bleeps per second (high priority) 4 = continuous (alarm priority) See “multiple LED functions” below.

[state] OFF or ON (capital letters) The brackets [ ] indicate that this command is optional. If nothing is entered in this field, the indication is switched on/off along with the event. By entering OFF, for example, you can set an indication to turn off when the event turns on.

Example

IND  2  23  2  3  ON – Station 2, key 23, turn green led, fast flashing, ON