Actions

IP-ARIO Restore Factory Defaults

From Zenitel Wiki

Revision as of 12:04, 26 October 2016 by Roarl (talk) (Created page with "==Factory Default IP Settings== To configure the IP-ARIO unit with Factory Default IP Settings do the following: # Disconnect power to the unit. <br/> # Reconnect power and wi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Factory Default IP Settings

To configure the IP-ARIO unit with Factory Default IP Settings do the following:

  1. Disconnect power to the unit.
  2. Reconnect power and within 5 seconds, use a pin to press and hold the pinhole Reset button (on the front right of the unit).
  3. Keep the Reset button pressed until the CALL LED emits 3 slow flashes followed by 3 fast flashes as confirmation that the unit is reset. (Takes appr. 25 seconds)
  4. Release the Reset button.

The unit’s IP settings will now be reset to the factory default values with IP address 169.254.1.100.

Front view


Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP-ARIO_Restore_Factory_Defaults&oldid=147301"