Difference between revisions of "IP DECT Base Repeater Wall"
From Zenitel Wiki
(→Repeater Type and part number) |
(→Repeater Type and part number) |
||
| Line 12: | Line 12: | ||
! style="background:#ffdead;" width="100" |'''Part Number:''' | ! style="background:#ffdead;" width="100" |'''Part Number:''' | ||
|- | |- | ||
| − | |Repeater Wall || | + | |Repeater Wall || align=left | 221 105 0100 |
|- | |- | ||
| − | |Repeater Ceiling || | + | |Repeater Ceiling || align=left | 221 105 0110 |
|- | |- | ||
|} | |} | ||
Revision as of 16:02, 14 September 2009
Contents
Description
The repeater is a building block used to extend the coverage area in a system. The repeater does not increase the number of traffic channels. However, it provides a larger physical spreading of the traffic channels and thereby increases the coverage area established with the base stations. The repeater can be used to extend the coverage area in a wireless radio synchronization solution, where it serves as a receiver and transmitter in relaying radio signals. Depending on the repeater type it can be mounted either on the wall or on the ceiling. the wireless repeater is used in areas with limited voice traffic, where cabling is difficult. The repeater is available with 4 voice channels. It is wireless and does not need a physical connection to the wireless server, making it very easy to install. Up to three repeaters can be placed in cascade formation directing coverage in a certain direction. If the radio environment is difficult , one should avoid installing repeaters. The repeaters can be supplied with an external antenna making it possible to create radio coverage in a remote area without cabling to the rest of the intsallation. The repeater is also termed WRFP (Wireless Radio Fixed Part).
Repeater Type and part number
The repeater contains RF circuitry that is compliant with the local band standards: UPCS, DECT, or ETSI DECT. The wall mounted repeater is available as a full slot repeater. A full slot repeater covers four simultaneous speech channels. These channels are borrowed from the attached base station, and are not additional channels to the total number of channels in the system.
| Type: | Part Number: |
|---|---|
| Repeater Wall | 221 105 0100 |
| Repeater Ceiling | 221 105 0110 |
Programming Software
The application software for programming the repeater and software downloads to the repeater is called ServiceTool. The ServiceTool application is available as a download here.
Specifications
Radio Coverage area:
Up to 150 meters outdoors
Maximum number of simultaneous calls:
4
Power supply:
External power supply, item number 221 105 0200
Size (WxHxD):
100 x 100 x 38mm
Weight:
0.12kg