Actions

IP Desktop with Video Display - Release Notes

From Zenitel Wiki

Revision as of 13:39, 18 November 2016 by Asle (talk)

Note: The release notes are for the LCD screen in the IP Desktop Station with Video Display - 1408001635.

Release notes for the IP desktop station is here.


Version 2.4

  • Improved compatibility with the TCIV station
  • Increased socket count for better network performance

Version 2.3

  • Performance optimization for the UART interface between the Desk Station and the display

Version 2.2

  • Fixed a bug where display text fragments were erroneously displayed
  • Added a touch calibration dialog to the display

Version 2.1

  • Fixed a display bug when restarting the station via display

Version 2.0

  • Added SIP-/PULSE-Support
  • Revised display handling and output

Version 1.13

  • Fixed an index error in the camera type list
  • Fixed an endless loop when trying to access an invalid camera URL
  • The resync timer for the camera stream will now be stopped, when syncronisation is successful

Version 1.12

  • Fixed a bug when entering an IP address and a subnet mask that don't "fit"

Version 1.11

  • Added factory reset via display
  • Increased the length of the camera type name in the dynamic camera type list to 100 characters
  • Increased the number of cameras to 80
  • Increased camera name to 15 characters

Version 1.10

  • Removed the MJPG streaming path for Grundig cameras
  • Added a dynamic list for up to 3 custom camera types including streaming path

Version 1.9

  • Fixed a bug where some display texts weren't cleared correctly
  • Added the MJPG streaming path for Grundig cameras

Version 1.8

  • Fixed a bug where, in manual camera selection, the first element in the list always required a passcode, even when passcode authentication was disabled
  • Changed the URL for Axis cameras from "mjpg/video.mjpg" to "axis- cgi/mjpg/video.cgi"
  • Changed the MJPG stream function to be compatible with older non-RFC-compliant Axis cameras
  • Changed the behavior of the LED (the "auo" DIP message does no longer turn off the LED)
  • Fixed a web server bug that was causing problems with digest authentication under IE9+
  • The "aue" DIP message is now ignored
  • Changed the fallback settings for username and password to "admin"/"alphaadmin"
  • Fixed a bug that incorrectly reconnected a camera, when another camera is manually selected during a connected call
  • Changed the LED time base
  • The station now displays an error screen when trying to stream a video in the wrong format/resolution
  • Fixed a timing problem when trying to connect to the camera of an incoming call, when manual camera selection is active

Version 1.7

  • Added detection of missing DIP messages
  • Changed font to a fixed width font
  • Increased camera count to 48
  • Added manual camera selection with passcode authentication via display
  • Added automatic camera switching, if more than one camera is added to a remote station
  • Overhauled the UI and web interface
  • Added a download/upload functionality for the camera list
  • The station does not need to reboot anymore, after changing the settings
  • Added factory reset via web interface

Version 1.6

  • Fixed a bug where the display wasn't cleared correctly in some cases
  • Font improvements (narrow characters are now centered instead of left aligned)

Version 1.5

  • Implemented encryption of the firmware file
  • Workflow adaptation

Version 1.4

  • Implemented DIP protocol via internal serial interface
  • Implemented bootloader with firmware upload via web interface

Version 1.3

  • Fixed a bug where the LEDs weren't correctly updated in some scenarios

Version 1.2

  • Fixed a problem with the web server, that could cause problems, if someone tries to access the web interface, while the device has initiated a reboot
  • Fixed a bug where the LEDs weren't correctly switched off when the state changed from "incoming call" to "idle"

Version 1.1

  • Fixed a network bug in DHCP mode
  • Improved network stability

Version 1.0

  • First release