Actions

Difference between revisions of "IP Flush Master Gooseneck"

From Zenitel Wiki

(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:1008097500.PNG|thumb|Gooseneck Microphone]]
+
{{AEIPS}}
:* Item number: 1008097500
+
[[File:1008097500.PNG|thumb|300px|Gooseneck Microphone. item no 1008097500]]
This item applies to the IP Flush Master Station and the IP Master Station Kit.
 
  
{|border="1"
+
This microphone is for
|width="250px"| 
+
* [[IP Flush Master -V2]]
|width="250px"|'''Dimensions (WxHxD)'''
+
* [[IP Master Station Kit - 1008493000|IP Master Station Kit -V2]]
|width="150px"|'''Weight'''
+
* [[IP Flush Master - 1008031000|INCA IP Flush Master Station]]
|-
+
* [[IP Master Station Kit - 1008093000|INCA IP Master Kit]]
|Gooseneck Microphone || 90 x 32 x 45 mm || 0.1 kg
 
|-
 
|}
 
  
<u>'''To install the Gooseneck Microphone:'''</u><br/>
+
To install the Gooseneck Microphone:
 
* Remove the cover plug from the opening for the microphone on the front panel.
 
* Remove the cover plug from the opening for the microphone on the front panel.
 
* Thread the microphone cable through the opening, the lock washer and nut.
 
* Thread the microphone cable through the opening, the lock washer and nut.
Line 19: Line 15:
 
* Slide the '''S1''' switch (bottom back of station) to '''EXT''' to activate the external microphone function.
 
* Slide the '''S1''' switch (bottom back of station) to '''EXT''' to activate the external microphone function.
  
See Related Article [[INCA Master Station Kit Board Connectors]].
+
For board connectors, see:
 +
* [[IP Flush Master -V2 Board Connectors]]
 +
* [[INCA Master Station Kit Board Connectors]]
  
[[File:IP_Master_Gooseneck_Microphone_Installation.PNG]]<br/>
+
[[File:IP_Master_Gooseneck_Microphone_Installation.PNG|350px]]<br/>
 
Installing the Gooseneck Microphone
 
Installing the Gooseneck Microphone
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Line 30: Line 28:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
===<u>[http://www.zenitel.com/product/gooseneck-microphone Additional Documentation on Zenitel.com]</u>===
+
== Related articles ==
 +
* [http://www.zenitel.com/product/gooseneck-microphone Additional Documentation on Zenitel.com]
  
 
[[Category: INCA Backboxes and accessories]]
 
[[Category: INCA Backboxes and accessories]]
 +
[[Category: Turbine Backboxes and accessories]]

Revision as of 09:47, 11 October 2021

AEIPS.png
Gooseneck Microphone. item no 1008097500

This microphone is for

To install the Gooseneck Microphone:

  • Remove the cover plug from the opening for the microphone on the front panel.
  • Thread the microphone cable through the opening, the lock washer and nut.
  • Tighten the nut on the microphone’s threaded stud.
  • Insert the microphone’s IDC socket into the upper two pins of the 3-pin header (J7) located at the lower left side of the station. The signal wire (white) should be on the top pin while the ground wire (green) should be on the bottom pin.
  • Slide the S1 switch (bottom back of station) to EXT to activate the external microphone function.

For board connectors, see:

IP Master Gooseneck Microphone Installation.PNG
Installing the Gooseneck Microphone


Gooseneck microphone connection
Gooseneck microphone connection, detailed


Related articles