Difference between revisions of "IP Flush Master Station LED Indications"

Latest revision as of 12:24, 20 November 2020

Station LED

Blinking at 1 second intervals:
Station cannot register to the server/controller

Possible reasons:

Invalid network settings (IP address and network mask) in the device
Wrong or missing account settings (Server IP, directory number, password..)
Failing to register due to missing license in the server
The server is offline
Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)

If the server is on a different subnet, check that

A valid Default gateway is defined

No blinking:

Possible reasons:

Station connected and registered to the ICX-AlphaCom
Station not powered up (if no other LEDs are active)

Blinking at 5 second intervals:

This LED behaviour only applies to INCA Desktop stations 1008031000 and 1008015000 in ICX-AlphaCom mode

Station connected but NOT registered in the ICX-AlphaCom

Possible reasons:

Station has not been programmed in AlphaPro
Missing IP Station license in ICX-AlphaCom

@@ Line 1: / Line 1: @@
-==Status LED==
+== Station LED ==
-LED3 – Bicolor SMD LED on board component side.
+[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]]
-[[File:MasterStationKit Indications1.png|left|thumb|400px|Status LED]]
 <br style="clear:both;" />
-'''Blinking 2 red + 1 green:'''<br>
+'''Blinking at 1 second intervals:'''<br/>
-* Station has no connection to the AlphaCom XE Audio Server.
+Station cannot register to the server/controller
-'''Blinking 1 red + 2 green:'''<br>
+Possible reasons:
-* Station connected but NOT registered in the AlphaCom XE Audio Server.
+* Invalid network settings (IP address and network mask) in the device
+* Wrong or missing account settings (Server IP, directory number, password..)
+* Failing to register due to missing license in the server
+* The server is offline
+* Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
+If the server is on a different subnet, check that
+* A valid Default gateway is defined
-'''Blinking 3 green:'''
+'''No blinking:'''
-* Station connected and registered in the AlphaCom XE Audio Server.
-==Power LED==
-LED6 – Yellow SMD LED on board component side.
-[[File:MasterStationKit Indications2.png|left|thumb|400px|Power LED]]
-<br style="clear:both;" />
-* Light:  13VDC board power OK.
-* No light:  13VDC board power faulty if no other LEDs are lit.
 Possible reasons:
-* 24 VDC or PoE not connected
+* Station connected and registered to the ICX-AlphaCom
-* Faulty board
+* Station not powered up (if no other LEDs are active)
-==LAN LEDs==
+'''Blinking at 5 second intervals:'''<br/>
-'''Left LED:'''<br>
+{{Note| This LED behaviour only applies to INCA Desktop stations [[IP Flush Master - 1008031000|1008031000]] and [[IP OR Master Station - 1008015000|1008015000]] in ICX-AlphaCom mode}}
-[[File:IP Master Indications 4.PNG|left|thumb|200px|Left LED]]
+Station connected but NOT registered in the ICX-AlphaCom
-<br style="clear:both;" />
-* Steady light:  Ethernet connection OK
-* Blinking:     Ethernet traffic
-* No light:    No Ethernet connection
-'''Right LED:'''<br>
+Possible reasons:
-[[File:IP Master Indications 5.PNG|left|thumb|200px|Right LED]]
+* Station has not been programmed in AlphaPro
-<br style="clear:both;" />
+* Missing IP Station license in ICX-AlphaCom
-* Light:    100 Mbit Ethernet connection
-* No light:  10 Mbit Ethernet connection
-[[Category:INCA Indication LEDs]]
+[[Category:Station Indication LEDs]]

Difference between revisions of "IP Flush Master Station LED Indications"

From Zenitel Wiki

Latest revision as of 12:24, 20 November 2020

Station LED