Difference between revisions of "IP Flush Master Station LED Indications"
From Zenitel Wiki
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
== Station LED == | == Station LED == | ||
− | |||
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | [[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Blinking at 1 second intervals:'''<br/> | '''Blinking at 1 second intervals:'''<br/> | ||
− | Station | + | Station cannot register to the server/controller |
Possible reasons: | Possible reasons: | ||
− | * | + | * Invalid network settings (IP address and network mask) in the device |
− | + | * Wrong or missing account settings (Server IP, directory number, password..) | |
− | * | + | * Failing to register due to missing license in the server |
− | * | + | * The server is offline |
− | + | * Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP) | |
− | + | If the server is on a different subnet, check that | |
− | + | * A valid Default gateway is defined | |
− | |||
− | |||
− | * | ||
− | |||
'''No blinking:''' | '''No blinking:''' | ||
Possible reasons: | Possible reasons: | ||
− | * Station connected and registered to the AlphaCom | + | * Station connected and registered to the ICX-AlphaCom |
* Station not powered up (if no other LEDs are active) | * Station not powered up (if no other LEDs are active) | ||
− | + | '''Blinking at 5 second intervals:'''<br/> | |
− | + | {{Note| This LED behaviour only applies to INCA Desktop stations [[IP Flush Master - 1008031000|1008031000]] and [[IP OR Master Station - 1008015000|1008015000]] in ICX-AlphaCom mode}} | |
− | + | Station connected but NOT registered in the ICX-AlphaCom | |
− | |||
− | '''Blinking | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Possible reasons: | Possible reasons: | ||
− | * | + | * Station has not been programmed in AlphaPro |
− | * | + | * Missing IP Station license in ICX-AlphaCom |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[Category: | + | [[Category:Station Indication LEDs]] |
Latest revision as of 12:24, 20 November 2020
Station LED
Blinking at 1 second intervals:
Station cannot register to the server/controller
Possible reasons:
- Invalid network settings (IP address and network mask) in the device
- Wrong or missing account settings (Server IP, directory number, password..)
- Failing to register due to missing license in the server
- The server is offline
- Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
If the server is on a different subnet, check that
- A valid Default gateway is defined
No blinking:
Possible reasons:
- Station connected and registered to the ICX-AlphaCom
- Station not powered up (if no other LEDs are active)
Blinking at 5 second intervals:
This LED behaviour only applies to INCA Desktop stations 1008031000 and 1008015000 in ICX-AlphaCom mode |
Station connected but NOT registered in the ICX-AlphaCom
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in ICX-AlphaCom