Difference between revisions of "IP Flush Master Station LED Indications"
From Zenitel Wiki
(Created page with "==Status LED== LED3 – Bicolor SMD LED on board component side. left|thumb|400px|Status LED <br style="clear:both;" /> '''Blinking...") |
|||
Line 1: | Line 1: | ||
− | ==Status LED== | + | == Station LED == |
+ | LED4 - Red 5mm LED on board rear side, also seen through front plate. | ||
+ | [[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | ||
+ | <br style="clear:both;" /> | ||
+ | '''Blinking at 1 second intervals:'''<br/> | ||
+ | Station has no connection to the AlphaCom XE Audio Server. | ||
+ | |||
+ | Possible reasons: | ||
+ | * No connection to Ethernet | ||
+ | * Wrong AlphaCom IP address configured | ||
+ | * Invalid IP address | ||
+ | * No gateway or wrong gateway to the AlphaCom XE Audio Server | ||
+ | |||
+ | '''Blinking at 5 second intervals:'''<br/> | ||
+ | Station connected but NOT registered in the AlphaCom XE Audio Server. | ||
+ | |||
+ | Possible reasons: | ||
+ | * Station has not been programmed in AlphaPro | ||
+ | * Missing IP Station license in AlphaCom XE Audio Server | ||
+ | |||
+ | '''No blinking:''' | ||
+ | |||
+ | Possible reasons: | ||
+ | * Station connected and registered to the AlphaCom XE Audio Server | ||
+ | * Station not powered up (if no other LEDs are active) | ||
+ | |||
+ | == Status LED == | ||
LED3 – Bicolor SMD LED on board component side. | LED3 – Bicolor SMD LED on board component side. | ||
[[File:MasterStationKit Indications1.png|left|thumb|400px|Status LED]] | [[File:MasterStationKit Indications1.png|left|thumb|400px|Status LED]] | ||
Line 12: | Line 38: | ||
* Station connected and registered in the AlphaCom XE Audio Server. | * Station connected and registered in the AlphaCom XE Audio Server. | ||
− | ==Power LED== | + | == Power LED == |
LED6 – Yellow SMD LED on board component side. | LED6 – Yellow SMD LED on board component side. | ||
[[File:MasterStationKit Indications2.png|left|thumb|400px|Power LED]] | [[File:MasterStationKit Indications2.png|left|thumb|400px|Power LED]] | ||
Line 23: | Line 49: | ||
* Faulty board | * Faulty board | ||
− | ==LAN LEDs== | + | == LAN LEDs == |
'''Left LED:'''<br> | '''Left LED:'''<br> | ||
[[File:IP Master Indications 4.PNG|left|thumb|200px|Left LED]] | [[File:IP Master Indications 4.PNG|left|thumb|200px|Left LED]] |
Revision as of 12:39, 25 October 2016
Contents
Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)
Status LED
LED3 – Bicolor SMD LED on board component side.
Blinking 2 red + 1 green:
- Station has no connection to the AlphaCom XE Audio Server.
Blinking 1 red + 2 green:
- Station connected but NOT registered in the AlphaCom XE Audio Server.
Blinking 3 green:
- Station connected and registered in the AlphaCom XE Audio Server.
Power LED
LED6 – Yellow SMD LED on board component side.
- Light: 13VDC board power OK.
- No light: 13VDC board power faulty if no other LEDs are lit.
Possible reasons:
- 24 VDC or PoE not connected
- Faulty board
LAN LEDs
Left LED:
- Steady light: Ethernet connection OK
- Blinking: Ethernet traffic
- No light: No Ethernet connection
Right LED:
- Light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection