Difference between revisions of "IP Heavy Duty - Restore Factory Defaults"

Revision as of 14:09, 17 March 2017

This procedure is applicable for the IP Heavy Duty station 1008072xx0

The Factory Default can be either set to Static IP 169.254.1.100 or activate DHCP.

Connect a push button (KEY1) between pin 1 and 4 on the P4 connector.

While pressing the button, power up the station kit.
When the station kit LED starts blinking, release the button after exactly 2 blinks.
Let the LED blink for exactly 2 more times, then press the button again.
Keep the button pressed until the LED blinks fast 2 times indicating a successful reset with static IP.
Release the button and the station kit will restart with the factory default settings.

Factory default values:

The DHCP option is available from software version 01.07.

While pressing the button, power up the station kit.
When the station kit LED starts blinking, release the button after exactly 2 blinks.
Let the LED blink for exactly 4 more times, then press the button again.
Keep the button pressed until the LED blinks fast 4 times indicating a successful reset with activated DHCP.
Release the button and the station kit will restart with the factory default settings.

Factory default values:

@@ Line 1: / Line 1: @@
-{{APS}}This procedure is applicable for:
+{{APS}}This procedure is applicable for the [[IP Heavy Duty Station|IP Heavy Duty station 1008072xx0]]
-* IP Master Station Kit [[IP Master Station Kit - 1008093000|100809300]]
-* IP Substation Kit - [[IP Substation Kit - 1008090200|1008090200]]
-* [[IP Heavy Duty Station|IP Heavy Duty station 1008072xx0]]
+The Factory Default can be either set to '''Static''' IP 169.254.1.100 or activate '''DHCP'''.
-The Factory Default can be either set to Static IP 169.254.1.100 or activate DHCP.
 Connect a push button ('''KEY1''') between pin 1 and 4 on the P4 connector.