Actions

Difference between revisions of "IP OR Station Dimensions & Mounting Instructions"

From Zenitel Wiki

(Created page with "{|border="1" |width="250px"|  |width="250px"|'''Dimensions (WxHxD)''' |width="150px"|'''Weight''' |- |IP Flush Master || 125 x 280 x 33 mm || 0.63 kg |- |IP OR Master ||...")
 
(Dimensions)
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
{|border="1"
 
|width="250px"| 
 
|width="250px"|'''Dimensions (WxHxD)'''
 
|width="150px"|'''Weight'''
 
|-
 
|IP Flush Master || 125 x 280 x 33 mm || 0.63 kg
 
|-
 
|IP OR Master || 125 x 280 x 30 mm || 0.63 kg
 
|-
 
|Master Station Kit || 88 x 152 x 20 mm || 0.25 kg
 
|-
 
|Gooseneck Microphone || 300 mm (length) || 0.09 kg
 
|-
 
|DAK-48 Unit || 125 x 280 x 30 mm || 0.65 kg
 
|-
 
|Handset - IP Flush Master || 67 x 280 x 41 mm || 0.4 kg
 
|-
 
|}
 
 
= IP Flush Master Station =
 
 
== Dimensions ==
 
== Dimensions ==
[[File:IP Station Dimensions - 5.PNG|''IP Flush Master - Dimensions'']]
+
[[IP OR Master Station - 1008015000|IP OR station]] dimensions:<br>
 +
[[File:IP OR Mounting.PNG|700px|''IP OR station - Dimensions'']]
  
== Backboxes ==
 
Backboxes for flush mounting and surface mounting are available for the IP Flush Master Station.<br/>
 
[[File:IP Station Dimensions - 7.PNG|Backbox for Flush Mount Station]]
 
[[File:IP Station Dimensions - 8.PNG|Backbox for Surface Mount Station]]
 
 
= IP OR Master Station =
 
 
== Mounting and Demounting ==
 
== Mounting and Demounting ==
 
The station is securely fastened to the backbox using the four retention pegs supplied.<br/>
 
The station is securely fastened to the backbox using the four retention pegs supplied.<br/>
Line 42: Line 17:
  
 
== Backbox ==
 
== Backbox ==
[[File:IP Station Dimensions - 9.PNG|''Flush Mount Backbox for IP OR Master Station'']]
+
[[File:IP Station Dimensions - 9.PNG|300px|''Flush Mount Backbox for IP OR Master Station'']]
  
= IP Master Station Kit =
 
[[File:IP Station Dimensions - 15.PNG|''IP Master Station Kit PCB Dimensions]]
 
  
= Handset - IP Flush Master Station =
 
== Backbox ==
 
[[File:IP Station Dimensions - 6.PNG|''Backbox for Handset'']]
 
  
 
[[Category:INCA Dimensions & Mounting Instructions]]
 
[[Category:INCA Dimensions & Mounting Instructions]]

Latest revision as of 23:27, 16 March 2017

Dimensions

IP OR station dimensions:
IP OR station - Dimensions

Mounting and Demounting

The station is securely fastened to the backbox using the four retention pegs supplied.
To mount the station:

  • Insert the four plastic retainers into the larger and inner of the holes at each corner of the backbox.
  • Align the four retention pegs with the four plastic retainers and push the station down until flush with the backbox.

Mounting the IP OR Master Station
To demount the station, follow the instructions precisely:

  • Using a flat-head screwdriver, gently pry loose each retention peg from the four corners. Make sure to pry loose each peg gradually so that all four pegs remain at an even plane during the whole process.
  • When the retention pegs are loose enough, lift the station out, making sure to keep the station at an even plane as it is lifted out from the backbox.
Caution! Do not lift the station at an angle as this may damage the pegs.

Demounting the IP OR Master Station

Backbox

Flush Mount Backbox for IP OR Master Station