Actions

IP OR Station Dimensions & Mounting Instructions

From Zenitel Wiki

Revision as of 23:13, 16 March 2017 by Asle (talk) (Backboxes)
  Dimensions (WxHxD) Weight
IP Flush Master 125 x 280 x 33 mm 0.63 kg
IP OR Master 125 x 280 x 30 mm 0.63 kg
Master Station Kit 88 x 152 x 20 mm 0.25 kg
Gooseneck Microphone 300 mm (length) 0.09 kg
DAK-48 Unit 125 x 280 x 30 mm 0.65 kg
Handset - IP Flush Master 67 x 280 x 41 mm 0.4 kg

IP Flush Master Station

Dimensions

IP Flush Master - Dimensions

IP OR Master Station

Mounting and Demounting

The station is securely fastened to the backbox using the four retention pegs supplied.
To mount the station:

  • Insert the four plastic retainers into the larger and inner of the holes at each corner of the backbox.
  • Align the four retention pegs with the four plastic retainers and push the station down until flush with the backbox.

Mounting the IP OR Master Station
To demount the station, follow the instructions precisely:

  • Using a flat-head screwdriver, gently pry loose each retention peg from the four corners. Make sure to pry loose each peg gradually so that all four pegs remain at an even plane during the whole process.
  • When the retention pegs are loose enough, lift the station out, making sure to keep the station at an even plane as it is lifted out from the backbox.
Caution! Do not lift the station at an angle as this may damage the pegs.

Demounting the IP OR Master Station

Backbox

Flush Mount Backbox for IP OR Master Station

IP Master Station Kit

IP Master Station Kit PCB Dimensions

Handset - IP Flush Master Station

Backbox

Backbox for Handset