Difference between revisions of "IP Station Image upgrade"
From Zenitel Wiki
(New page: == Introduction == This is a guide on how to carry out a full image upgrade of STENTOFON IP stations. There are two ways of doing a full image upgrade, locally on each station using its ...) |
|||
| Line 25: | Line 25: | ||
tftpd32, or the application can be downloaded from: | tftpd32, or the application can be downloaded from: | ||
http://tftpd32.jounin.net. | http://tftpd32.jounin.net. | ||
| + | |||
| + | == Local Upgrade == | ||
| + | To do a local image upgrade on one IP Station, do the following: | ||
| + | |||
| + | * Install and configure the tftp-server application tftp32 as described in section 12.3.1 | ||
| + | * Unpack the .bin and .txt files from the image upgrade package provided by Zenitel into the defined base-directory for tftpd32. (For installation and use of tftp32.xxx, see 12.3.1) | ||
| + | * Start tftpd32.xxx by clicking on the tftpd32.xxx.exe file. ''If there is a firewall blocking tftpd32.xxx, unblock it to open the tftp-port in the firewall'' | ||
| + | * Open a web browser on the PC and enter the IP Stations IP address in the address field | ||
| + | * Log on to the station web server and choose System Upgrade -> Full Upgrade from the menu | ||
| + | * Enter the TFTP server IP address (the IP-address of the PC running tftpd32.xxx). The IP address is displayed in the tftpd32-window on the PC | ||
| + | * Enter the filename for the IP Station image which is: A100G80222.xxxx.bin where xxxx is the software version | ||
| + | * Open the corresponding A100G80222.xxxx.txt file to find the checksum for the image. Copy and Enter this value into the CRC field in the web server Figure 70 Full image upgrade confirmation page | ||
Revision as of 10:08, 16 August 2007
Introduction
This is a guide on how to carry out a full image upgrade of STENTOFON IP stations.
There are two ways of doing a full image upgrade, locally on each station using its web server, or a distributed upgrade initiated from AlphaWeb. See also section 5.2.
Equipment needed
The following equipment is needed to do a full image upgrade of the STENTOFON IP Station:
- A PC running a tftp-server and a web browser tftpd32.exe is provided by Zenitel
- The IP station to be upgraded
- A software upgrade package for IP stations provided by Zenitel.
Software package
The software package from Zenitel will contain the following files:
- A IP Station image file,
A100G80222.xxxx.bin (xxxx = version)
- A text file containing a checksum for the image file,
A10080222.xxxx.txt.
- A text file named tftp_test.txt, used to check the tftp-connection during the upgrade
In addition to this, Zenitel can provide a TFTP server application, tftpd32, or the application can be downloaded from: http://tftpd32.jounin.net.
Local Upgrade
To do a local image upgrade on one IP Station, do the following:
- Install and configure the tftp-server application tftp32 as described in section 12.3.1
- Unpack the .bin and .txt files from the image upgrade package provided by Zenitel into the defined base-directory for tftpd32. (For installation and use of tftp32.xxx, see 12.3.1)
- Start tftpd32.xxx by clicking on the tftpd32.xxx.exe file. If there is a firewall blocking tftpd32.xxx, unblock it to open the tftp-port in the firewall
- Open a web browser on the PC and enter the IP Stations IP address in the address field
- Log on to the station web server and choose System Upgrade -> Full Upgrade from the menu
- Enter the TFTP server IP address (the IP-address of the PC running tftpd32.xxx). The IP address is displayed in the tftpd32-window on the PC
- Enter the filename for the IP Station image which is: A100G80222.xxxx.bin where xxxx is the software version
- Open the corresponding A100G80222.xxxx.txt file to find the checksum for the image. Copy and Enter this value into the CRC field in the web server Figure 70 Full image upgrade confirmation page