|
|
| (9 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| − | == Introduction ==
| + | #REDIRECT [[INCA Station Software upgrade]] |
| − | | |
| − | This is a guide on how to carry out a full image upgrade of
| |
| − | STENTOFON IP stations.
| |
| − | | |
| − | There are two ways of doing a full image upgrade, locally on each
| |
| − | station using its web server, or a distributed upgrade initiated from
| |
| − | AlphaWeb. See also section 5.2.
| |
| − | | |
| − | === Equipment needed ===
| |
| − | The following equipment is needed to do a full image upgrade of
| |
| − | the STENTOFON IP Station:
| |
| − | * A PC running a tftp-server and a web browser tftpd32.exe is provided by Zenitel
| |
| − | * The IP station to be upgraded
| |
| − | * A software upgrade package for IP stations provided by Zenitel.
| |
| − | === Software package ===
| |
| − | The software package from Zenitel will contain the following files:
| |
| − | * A IP Station image file,
| |
| − | A100G80222.xxxx.bin (xxxx = version)
| |
| − | * A text file containing a checksum for the image file,
| |
| − | A10080222.xxxx.txt.
| |
| − | * A text file named tftp_test.txt, used to check the tftp-connection during the upgrade
| |
| − | | |
| − | In addition to this, Zenitel can provide a TFTP server application,
| |
| − | tftpd32, or the application can be downloaded from:
| |
| − | http://tftpd32.jounin.net.
| |
| − | | |
| − | == Local Upgrade ==
| |
| − | To do a local image upgrade on one IP Station, do the following:
| |
| − | [[Image:pic8.jpg|right|300px|thumb|Full upgrade menu button]] | |
| − | * Install and configure the tftp-server application tftp32 as described in section 12.3.1
| |
| − | * Unpack the .bin and .txt files from the image upgrade package provided by Zenitel into the defined base-directory for tftpd32. (For installation and use of tftp32.xxx, see 12.3.1)
| |
| − | * Start tftpd32.xxx by clicking on the tftpd32.xxx.exe file. ''If there is a firewall blocking tftpd32.xxx, unblock it to open the tftp-port in the firewall''
| |
| − | * Open a web browser on the PC and enter the IP Stations IP address in the address field
| |
| − | * Log on to the station web server and choose System Upgrade -> Full Upgrade from the menu
| |
| − | * Enter the TFTP server IP address (the IP-address of the PC running tftpd32.xxx). The IP address is displayed in the tftpd32-window on the PC
| |
| − | * Enter the filename for the IP Station image which is: A100G80222.xxxx.bin where xxxx is the software version
| |
| − | [[Image:pic9.jpg|right|150px|thumb|Full image upgrade parameters page]]
| |
| − | * Open the corresponding A100G80222.xxxx.txt file to find the checksum for the image. Copy and Enter this value into the CRC field in the web server
| |
