|
|
| (2 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | == Introduction ==
| + | #REDIRECT [[INCA Station Software upgrade]] |
| − | | |
| − | This is a guide on how to carry out a full image upgrade of
| |
| − | STENTOFON IP stations.
| |
| − | | |
| − | There are two ways of doing a full image upgrade, locally on each
| |
| − | station using its web server, or a distributed upgrade initiated from
| |
| − | AlphaWeb. See also section 5.2.
| |
| − | | |
| − | === Equipment needed ===
| |
| − | The following equipment is needed to do a full image upgrade of
| |
| − | the STENTOFON IP Station:
| |
| − | * A PC running a tftp-server and a web browser tftpd32.exe is provided by Zenitel
| |
| − | * The IP station to be upgraded
| |
| − | * A software upgrade package for IP stations provided by Zenitel.
| |
| − | === Software package ===
| |
| − | The software package from Zenitel will contain the following files:
| |
| − | * A IP Station image file,
| |
| − | A100G80222.xxxx.bin (xxxx = version)
| |
| − | * A text file containing a checksum for the image file,
| |
| − | A10080222.xxxx.txt.
| |
| − | * A text file named tftp_test.txt, used to check the tftp-connection during the upgrade
| |
| − | | |
| − | In addition to this, Zenitel can provide a TFTP server application,
| |
| − | tftpd32, or the application can be downloaded from:
| |
| − | http://tftpd32.jounin.net.
| |
| − | | |
| − | == Local Upgrade ==
| |
| − | To do a local image upgrade on one IP Station, do the following:
| |
| − | [[Image:pic8.jpg|right|300px|thumb|Full upgrade menu button]] | |
| − | * Install and configure the tftp-server application tftp32 as described in section 12.3.1
| |
| − | * Unpack the .bin and .txt files from the image upgrade package provided by Zenitel into the defined base-directory for tftpd32. (For installation and use of tftp32.xxx, see 12.3.1)
| |
| − | * Start tftpd32.xxx by clicking on the tftpd32.xxx.exe file. ''If there is a firewall blocking tftpd32.xxx, unblock it to open the tftp-port in the firewall''
| |
| − | * Open a web browser on the PC and enter the IP Stations IP address in the address field
| |
| − | * Log on to the station web server and choose System Upgrade -> Full Upgrade from the menu
| |
| − | * Enter the TFTP server IP address (the IP-address of the PC running tftpd32.xxx). The IP address is displayed in the tftpd32-window on the PC
| |
| − | * Enter the filename for the IP Station image which is: A100G80222.xxxx.bin where xxxx is the software version
| |
| − | [[Image:pic9.jpg|right|150px|thumb|Full image upgrade parameters page]][[Image:pic10.jpg|right|150|thumb|Full image upgrade confirmation page]]
| |
| − | * Open the corresponding A100G80222.xxxx.txt file to find the checksum for the image. Copy and Enter this value into the CRC field in the web server
| |
| − | * Press '''Save Settings'''.
| |
| − | | |
| − | A TFTP connection check will now be performed by the program. If the connection is OK, a status window will show the applied parameters and an '''Upgrade''' button is displayed.
| |
| − | | |
| − | * Verify that the image filename and checksum is correct,
| |
| − | then press Upgrade to initiate a full image upgrade.
| |
| − | | |
| − | After about 3 minutes, the station will come up with the same IP
| |
| − | address and configuration as before
| |
| − | | |
| − | * To verify that the image has been updated, go to the '''Station'''
| |
| − | '''Info''' page on the web server and check the current software
| |
| − | version.
| |
| − | | |
| − | == TFTPD32 Application ==
| |
| − | tftpd32 is a Windows based application, which can be used to run
| |
| − | a TFTP server on a Windows PC. The program can be
| |
| − | downloaded from http://tftpd32.jounin.net, but will also be provided
| |
| − | by Zenitel together with the software package.
| |
| − | | |
| − | === Installing and configuring tftpd32 ===
| |
| − | [[Image:pic11.jpg|right|150px|thumb|Settings window for tftpd32. Tftpboot is set as root directory]]
| |
| − | * '''Unzip the tftpd32.xxx.zip file.'''
| |
| − | (e.g. to C: \tftpd32\)
| |
| − | * '''Run the .exe file.'''
| |
| − | The program is run by selecting the extracted .exe file, no
| |
| − | installation is needed
| |
| − | * '''Create a folder called “tftpboot”'''
| |
| − | (e.g. c:\tftpd32\tftpd32.xxx\tftpboot) and set this folder as ‘'''Base'''
| |
| − | '''directory’''' in tftpd32 (use the '''Settings''' button).
| |
| − | * '''Turn off the DHCP Server under Global Settings'''
| |
| − | This server part of the tftp32 application may interfere with
| |
| − | other DHCP servers in the network
| |
| − | * The TFTP Server program must be running during the Image
| |
| − | upgrade process. | |
| − | [[Category: Stations]]
| |
| − | [[Category: IP Stations]]
| |
