Actions

Difference between revisions of "IP Substation Indication LEDs"

From Zenitel Wiki

 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Image:IP substation connections.jpg|280px|right|IP Substation Connections]]
+
#REDIRECT [[Weather and Vandal Resistant IP Substation - 1008041100]]
== Station LED (on board and in front plate) ==
 
'''Blinking at 1 second interval''': Station does not have connection to the AlphaCom E exchange.
 
:''Possible reasons'':
 
:* No connection to Ethernet
 
:* Wrong AlphaCom E IP address configured
 
:* Invalid IP address
 
:* No or wrong gateway to the AlphaCom E exchange
 
 
'''Blinking at 5 seconds interval''': Station has connection to the AlphaCom E exchange, but has not been registered.
 
:''Reason'':
 
:* Station has not been programmed in AlphaPro
 
 
 
'''No blinking'''
 
:''Possible reasons'':
 
:* Station connected and registered to the AlphaCom E exchange - All OK
 
:* Station not powered up (if no other LEDs are active)
 
 
 
== Status LED ==
 
'''Blinking 2 red + 1 green''': Station does not have connection to the AlphaCom E exchange
 
'''Blinking 1 red + 2 green''':Station has connection to AlphaCom E exchange, but has not been registered
 
'''Blinking 3 green''': Station connected and registered in the AlphaCom E exchange
 
 
 
== LAN LEDs (on LAN and AUX RJ45-jacks) ==
 
'''Left green LED''':
 
* Steady light Ethernet connection OK
 
* Blinking Ethernet traffic
 
* No light No Ethernet connection
 
'''Right amber LED''':
 
* Light 100 Mbit Ethernet connection
 
* No light 10 Mbit Ethernet connection
 
 
 
[[Category: Stations]]
 
[[Category: IP Stations]]
 

Latest revision as of 15:31, 10 February 2009