|
|
(2 intermediate revisions by one other user not shown) |
Line 1: |
Line 1: |
− | [[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | + | #REDIRECT [[Weather and Vandal Resistant IP Substation - 1008041100]] |
− | == Station LED (on board and in front plate) ==
| |
− | '''Blinking at 1 second interval''': Station does not have connection to the AlphaCom E exchange.
| |
− | :''Possible reasons'':
| |
− | :* No connection to Ethernet
| |
− | :* Wrong AlphaCom E IP address configured
| |
− | :* Invalid IP address
| |
− | :* No or wrong gateway to the AlphaCom E exchange
| |
− |
| |
− | '''Blinking at 5 seconds interval''': Station has connection to the AlphaCom E exchange, but has not been registered.
| |
− | :''Reason'':
| |
− | :* Station has not been programmed in AlphaPro
| |
− | | |
− | '''No blinking'''
| |
− | :''Possible reasons'':
| |
− | :* Station connected and registered to the AlphaCom E exchange - All OK
| |
− | :* Station not powered up (if no other LEDs are active)
| |
− | | |
− | == Status LED ==
| |
− | * '''Blinking 2 red + 1 green''': Station does not have connection to the AlphaCom E exchange
| |
− | * '''Blinking 1 red + 2 green''':Station has connection to AlphaCom E exchange, but has not been registered
| |
− | * '''Blinking 3 green''': Station connected and registered in the AlphaCom E exchange
| |
− | | |
− | == LAN LEDs (on LAN and AUX RJ45-jacks) ==
| |
− | '''Left green LED''':
| |
− | * Steady light: Ethernet connection OK
| |
− | * Blinking: Ethernet traffic
| |
− | * No light: No Ethernet connection
| |
− | '''Right amber LED''':
| |
− | * Light: 100 Mbit Ethernet connection
| |
− | * No light: 10 Mbit Ethernet connection
| |
− | | |
− | [[Category: Stations]]
| |
− | [[Category: IP Stations]]
| |