Actions

Difference between revisions of "IP Substation Kit - 1008090200"

From Zenitel Wiki

(Dimensions)
(42 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Image:80902 RS.jpg|thumb|250px]]
+
{{AEIPS}}
 +
[[Image:80902 RS.jpg|thumb|250px|IP Substation Kit]]
 +
== Connections ==
 +
* [[IP Sub Connections|Intercom connections]]
  
== Features ==
+
==Configuration==
* Designed to deliver CCoIP® - Critical Communication over IP
+
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
* Enables manufacturing of custom made IP substations
+
* [[IP Station Configuration - ICX-AlphaCom mode]]
* Remote software upgrade, configuration and monitoring
+
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
* Integrated data switch with advanced networking and security functions
+
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]]
* Relay output for remote control, e.g. doors, signal lamps and gates
+
* [[IP Station Configuration - Pulse mode]]
* Powered from the IP network cable using Power over Ethernet (PoE)
 
* Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo ▪▪cancellation and high output power amplifier
 
  
==Desription==
+
== Restore Factory Defaults and Software Upgrade ==
The STENTOFON IP Substation Kit features the electronics card as used in STENTOFON ’s own IP substations. It is designed to produce stations to the highest specification and for use in the harshest of environments. <br/>
+
* [[INCA Station Kit Restore Factory Defaults|Reset to factory settings]]
Designed for CC oIP ® the station card offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment. <br/>
+
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
Like all STENTOFON stations, this IP substation kit features superb audio quality. This is enabled through a set of advanced technologies such as active noise filtering, acoustic echo cancellation, wide band audio codec, and high power audio outputs. <br/>
+
* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
The station card has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom E exchange. <br/>
+
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
The IP substation card has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:
 
* Protection from unwanted access
 
* Quality of Service (QoS) by managing data traffic
 
* Increased system availability through redundant LAN infrastructure
 
* Cost efficient installation by providing shared network connections
 
<br/>
 
To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, Syslog or OPC .
 
  
==Specifications==
+
== Connectors, Indicators and Dimensions ==
{| border="1"
+
*[[INCA Substation Board Connectors|Board Connectors]]
|-
+
* [[INCA Substation PCB LED Indicators|PCB LED Indications]]
| Dimensions (H x W x D) || 110 x 72 x 20 mm
+
*[[IP Substation Kit Dimensions & Mounting Instructions|Dimensions]]
|-
 
| Weight || 250 g
 
|-
 
| Call buttons || Connection for 3 NO contacts
 
|-
 
| Mounting || Inside custom made stations
 
|-
 
|Temperature || -50°C to +55°C
 
|-
 
|Relative Humidity || 0% to 95%
 
|-
 
| Power || Power over Ethernet, IEEE 802.3 a-f, Class 0 <br/> Local power 19-27 VDC, Idle 4W, max. 8W
 
|-
 
| Connectors || 2 x RJ45 (Ethernet) 10/100 Mbps <br/> Pluggable screw terminals (audio and IO)
 
|-
 
| Remote control || 3 digital inputs, 1 relay output and one logical output
 
|-
 
| IP Protocols || IP v4 - TCP - UDP - HTTPS - TFTP - RTP - RTCP - DHCP - SNMP - DiffServ - TOS - STENTOFON CCoIP®
 
|-
 
| LAN Protocols  || Power over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq), <br/> Network Access Control (IEEE 802.1x), STP (IEEE 802.1d) <br/> RSTP (IEEE 802.1d-2004)
 
|-
 
| Audio technology || Wideband 200 Hz - 7 kHz (G.722) <br/> Telephony 3.4kHz (G.711) <br/> Acoustic echo cancellation <br/>
 
Open duplex <br/> Adaptive jitter filter <br/> 1.5 Watt audio output <br/> 8 ohm loudspeaker impedance
 
External audio output (0 dB, 600 ohm)
 
|-
 
| Management and operation || HTTPS (Web configuration) <br/> DHCP and static IP <br/> Remote automatic software upgrade <br/> Centralized monitoring <br/> Status LED
 
|-
 
|Advanced features || Dual port managed data switch supporting VLAN and network access control
 
|}
 
  
 
== Accessories ==
 
== Accessories ==
The IP Substation Kit itself includes the PCB. An optional [[Mounting and Assembly Kit for IP Substation - 1008091000|Mounting and Assembly Kit]] includes gaskets, two inch loudspeaker, loudspeaker housing and microphone with mounting block for call LED.
+
* [[Mounting and Assembly Kit for IP Substation - 1008091000]]
  
==Installation==
+
== Software Requirements ==
See article: [[IP Station Installation]]
+
This station is fully supported as form AlphaCom version 10.20
  
==Station Board Connectors and LED Indications==
+
== Related information ==
See article: [[IP_Station_Board_Connections_and_Indications#8022_-_IP_Substation|IP Station Board Connections and Indications]]
+
* [[IP Substation - Amplified calling]]
 +
* [[IP SubStations, Acoustical design]]
 +
* [http://www.zenitel.com/product/ip-substations-kits Additional Documentation on Zenitel.com]
  
== IP Station Configuration ==
+
[[Category: INCA Stations]]
See article: [[IP Station Configuration]]
+
[[Category: Public Address - Interfaces]]
 
 
==Reset to factory settings==
 
See article: [[IP_Station_Restore_Factory_Defaults|IP Station Restore Factory Defaults]]
 
 
 
==Software Upgrade==
 
See article: [[IP Station Software upgrade]]
 
 
 
==Dimensions==
 
See article: [[IP_Stations_Dimensions_%26_Mounting_Instructions|IP Stations Dimensions and Mounting Instructions]]
 
 
 
[[Category: Stations]]
 
[[Category: IP Stations]]
 

Revision as of 14:38, 22 December 2020

AEIPS.png
IP Substation Kit

Connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 10.20

Related information