Difference between revisions of "IP Substation Kit - 1008090200"

Revision as of 15:38, 22 December 2020

IP Substation Kit

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Mounting and Assembly Kit for IP Substation - 1008091000

Software Requirements

This station is fully supported as form AlphaCom version 10.20

Related information

@@ Line 1: / Line 1: @@
+{{AEIPS}}
 [[Image:80902 RS.jpg|thumb|250px|IP Substation Kit]]
+== Connections ==
+* [[IP Sub Connections|Intercom connections]]
-== Highlights ==
+==Configuration==
-* Compatible with Vingtor-Stentofon AlphaCom, Vingtor-Stentofon Pulse and iPBXs (SIP)
+The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-* Designed to deliver CCoIP® - Critical Communication over IP
+* [[IP Station Configuration - ICX-AlphaCom mode]]
-* Enables manufacturing of custom made IP substations
+* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
-* Remote software upgrade, configuration and monitoring
+* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]]
-* Integrated data switch with advanced networking and security functions
+* [[IP Station Configuration - Pulse mode]]
-* Relay output for remote control, e.g. doors, signal lamps and gates
-* Powered from the IP network cable using Power over Ethernet (PoE)
-* Superb audio quality – high bandwidth codec, active noise cancellation, acoustic echo cancellation and high output power amplifier
-==Additional Documentation==
+== Restore Factory Defaults and Software Upgrade ==
-For more documentation please see http://www.zenitel.com/product/ip-substations-kits
+* [[INCA Station Kit Restore Factory Defaults|Reset to factory settings]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+== Connectors, Indicators and Dimensions ==
+*[[INCA Substation Board Connectors|Board Connectors]]
+* [[INCA Substation PCB LED Indicators|PCB LED Indications]]
+*[[IP Substation Kit Dimensions & Mounting Instructions|Dimensions]]
 == Accessories ==
-The IP Substation Kit itself includes the PCB. An optional [[Mounting and Assembly Kit for IP Substation - 1008091000|Mounting and Assembly Kit]] includes gaskets, two inch loudspeaker, loudspeaker housing and microphone with mounting block for call LED.
+* [[Mounting and Assembly Kit for IP Substation - 1008091000]]
-==Installation==
-See article: [[IP Station Installation]]
-==Station Board Connectors and LED Indications==
-See article: [[IP_Station_Board_Connections_and_Indications#8022_-_IP_Substation|IP Station Board Connections and Indications]]
-== IP Station Configuration ==
-See article: [[IP Station Configuration]]
-==Reset to factory settings==
-See article: [[IP_Station_Restore_Factory_Defaults|IP Station Restore Factory Defaults]]
-==Software Upgrade==
+== Software Requirements ==
-See article: [[INCA Station Software upgrade]]
+This station is fully supported as form AlphaCom version 10.20
-==Dimensions==
+== Related information ==
-See article: [[IP_Stations_Dimensions_%26_Mounting_Instructions|IP Stations Dimensions and Mounting Instructions]]
+* [[IP Substation - Amplified calling]]
+* [[IP SubStations, Acoustical design]]
+* [http://www.zenitel.com/product/ip-substations-kits Additional Documentation on Zenitel.com]
 [[Category: INCA Stations]]
+[[Category: Public Address - Interfaces]]