Actions

Difference between revisions of "ITSV-2 & ITSV-3 Restore Factory Defaults"

From Zenitel Wiki

(Restore to Factory Default)
m (Restore to Factory Default via the Web interface)
 
(17 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
 
This article describes how to restore factory defaults of the ITSV-3 station.
 
This article describes how to restore factory defaults of the ITSV-3 station.
==Restore to Factory Default==
+
{{obs|Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings.}}
===Restore to Factory Default via LCD Menu===
 
  
* Select the '''Settings''' icon on the screen, and scroll down to the '''Advanced''' section. Select '''System Security''' > '''Factory Default'''
+
==Restore to Factory Default via LCD Menu==
  
 +
* Select the '''Settings''' icon on the screen, and scroll down to the '''Advanced''' section. Select '''System security''' > '''Factory reset'''
  
===Restore to Factory Default via the Web GUI===
+
 
 +
==Restore to Factory Default via the Web interface ==
 
<ol>
 
<ol>
<li> Login to ITSV-1 Web GUI and go to Maintenance>Upgrade page </li>
+
<li> Login to ITSV-2 or ITSV-3 Web GUI and go to '''Maintenance''' > '''Upgrade''' page </li>
<li> At the bottom of the page, click on the Reset button for Factory reset. Select "Clear the SD Card" if you would like to delete all the picture, videos and other files from the SD card storage on the ITSV-1</li>
+
<li> Under the '''Advanced Settings''' tab, select '''Factory Reset'''.</li>
[[File:ITSV-1 webfactoryreset.png|600px|thumb|left|Factory Reset]]
+
[[File:ITSV-3 FR Web.png|600px|thumb|left|Factory Reset]]
<br style="clear:both;" />
 
<li> A dialog box will pop up to confirm factory reset. The dialog box is created at the top of the screen</li>
 
[[File:ITSV-1 webconfirmreset.png|600px|thumb|left|Confirm the reset]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
<li> Click OK to restore the ITSV-1 to factory settings </li>
 
 
</ol>
 
</ol>
  
===Restore to Factory Default via Hard Keys===
+
==Hard reset==
If users could not access web GUI for factory reset, or when the ITSV-1 cannot boot up, follow the steps below to reset the ITSV-1 via hard keys.
+
For users that want to do factory reset of the device manually, hard reset is an alternative:
# Turn off the ITSV-1
+
===ITSV-2===
# Press and hold both 1 and 9 keys at the same time until it enters the factory reset mode
+
# Power cycle the ITSV-2.
# The ITSV-1 will boot up with factory default settings
+
#Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys '''1''' and '''9'''' at the same time, it will go into the factory reset process.
 +
#The LCD screen will display “Factory reset, please wait”.
 +
#The ITSV-2 will reboot with factory default settings.
 +
 
 +
===ITSV-3===
 +
# Power cycle the ITSV-3.
 +
#Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys (the second LCD key from the left: Volume Up) and (the 4th LCD key from the left: Menu) at the same time, it will go into the factory reset process.
 +
#The LCD screen will display “Factory reset, please wait”.
 +
#The ITSV-3 will reboot with factory default settings.
 +
 
 +
<br>
  
===Factory default values===
+
==Factory default values==
  
 
*Station IP address: DHCP
 
*Station IP address: DHCP
Line 32: Line 39:
 
*Password: '''alphaadmin'''
 
*Password: '''alphaadmin'''
  
The very first time you log in you are prompted to change the password.  
+
The very first time you log in via the web interface you are prompted to change the password.  
 
{{note|Make sure to make a note of the new password!}}
 
{{note|Make sure to make a note of the new password!}}
  
  
 
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]
 
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 14:20, 6 December 2022

AEIPS.png

This article describes how to restore factory defaults of the ITSV-3 station.

OBS icon Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings.


Restore to Factory Default via LCD Menu

  • Select the Settings icon on the screen, and scroll down to the Advanced section. Select System security > Factory reset


Restore to Factory Default via the Web interface

  1. Login to ITSV-2 or ITSV-3 Web GUI and go to Maintenance > Upgrade page
  2. Under the Advanced Settings tab, select Factory Reset.
  3. Factory Reset


Hard reset

For users that want to do factory reset of the device manually, hard reset is an alternative:

ITSV-2

  1. Power cycle the ITSV-2.
  2. Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys 1 and 9' at the same time, it will go into the factory reset process.
  3. The LCD screen will display “Factory reset, please wait”.
  4. The ITSV-2 will reboot with factory default settings.

ITSV-3

  1. Power cycle the ITSV-3.
  2. Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys (the second LCD key from the left: Volume Up) and (the 4th LCD key from the left: Menu) at the same time, it will go into the factory reset process.
  3. The LCD screen will display “Factory reset, please wait”.
  4. The ITSV-3 will reboot with factory default settings.


Factory default values

  • Station IP address: DHCP
  • Username: admin
  • Password: alphaadmin

The very first time you log in via the web interface you are prompted to change the password.

Note icon Make sure to make a note of the new password!