Licensing in IC-EDGE
From Zenitel Wiki
Some devices used in the IC-EDGE System requires that a software license is installed. The license key is linked to the MAC address of the Edge Controller. The following devices require a license:
- Additional Zenitel devices beyond the quantity of 32. Maximum 64 devices in total.
- 3rd Party SIP devices. Maximum 10 devices.
- Telephone gateways. Maximum 10 gateways.
|
|
Available licenses
The following licenses are available:
| License | Item Number | Comments |
| Intercom Extension | 1009661001 | License for additional Vingtor-Stentofon devices beyond 32. One license per device. Note that the first 32 devices do not require any license |
| SIP Client Extension | 1009661201 | License for 3rd party SIP telephone. One license per phone. Max 10 SIP phones |
| Telephone Gateway | 1009662001 | License for GSM telephone gateway and Analog telephone gateway. One license per gateway |
Obtaining a license
Zenitel generates a ‘License Activation Code’ (LAC) which can be regarded as the actual article. In order for Zenitel to be able to generate the actual License Key, the License Activation Code must be registered at Zenitel together with the MAC-address of the IC-Edge Controller for which the license is intended.
Registration can be done by reporting the MAC-address and LAC in an e-mail to cs@zenitel.com. More than one LAC can be listed on the registration form. All listed License Activation Codes together with the MAC address will be used to generate a single License Key which will enable all licensed functions.
The License Key will be shipped to the customer’s e-mail address. As the License key is rather complex, it should be inserted using the copy/paste function.
Installing a license
To insert a license:
- Obtain the license key from your local supplier
- Log on to the Edge Controller
- Select Edge Controller > Licensing
- In the New License field enter a valid license code, then Activate License
 |
| License for 4 SIP devices installed |