Difference between revisions of "Light Industrial Master Station with Loudspeaker - 1007080000"
From Zenitel Wiki
(→Handset troubleshooting) |
(→Handset troubleshooting) |
||
| Line 25: | Line 25: | ||
=== Handset troubleshooting === | === Handset troubleshooting === | ||
| − | '''Symptom:''' When an industrial station type 100 7080 000 is equipped with a handset there is a knows issue related to the handset operation: when the handset is replaced (on-hook) during conversation, the conversation does not cancel. | + | *'''Symptom:''' When an industrial station type 100 7080 000 is equipped with a handset there is a knows issue related to the handset operation: when the handset is replaced (on-hook) during conversation, the conversation does not cancel. |
| − | + | *'''Solution:''' A component must be changed on the station PCB; A100C01433, in order to make the converstion cancel. Change capacitor C14 (47µF/100V) to 4,7µF/63V. <br> | |
| − | '''Solution:''' A component must be changed on the station PCB; A100C01433, in order to make the converstion cancel. Change capacitor C14 (47µF/100V) to 4,7µF/63V. <br> | ||
[[File:7080_handset_cancel.PNG|thumb|left|500px]] | [[File:7080_handset_cancel.PNG|thumb|left|500px]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 15:00, 15 August 2018
The Light Industrial Master Station is an analog intercom station. It is connected to an ASLT line card in an AlphaCom XE7, AlphaCom XE20 or AlphaCom XE26 server using 2 pairs of wires.
Contents
Highlights
- Fully equipped splashproof master station with free access to all extensions and features
- Flame- and chip-resistant plastic casing. Key board foil of UV-cured PVC. Resistant to corrosive fluids
- Electret microphone and red microphone live lamp
- Screw terminals for easy connection of installation cables
- Built-in loudspeaker and possibility to connect an external speaker. Sound level adjustable with a potentiometer inside the station
- Built-in 10W (8 Ohm) VOX operated power amplifier for external loudspeaker
Connections
For server end connection details see ASLT - AlphaCom Subscriber Line Board
Handset connection
When handset is connected, open shunt S8 and S11.
Handset troubleshooting
- Symptom: When an industrial station type 100 7080 000 is equipped with a handset there is a knows issue related to the handset operation: when the handset is replaced (on-hook) during conversation, the conversation does not cancel.
- Solution: A component must be changed on the station PCB; A100C01433, in order to make the converstion cancel. Change capacitor C14 (47µF/100V) to 4,7µF/63V.
Dimensional Drawing
