Difference between revisions of "Linux Console"
From Zenitel Wiki
| Line 25: | Line 25: | ||
Password: com | Password: com | ||
The Telnet port (23) is by default disabled in the firewall | The Telnet port (23) is by default disabled in the firewall | ||
| + | |||
| + | |||
| + | |||
| + | =Linux Console – Serial Port= | ||
| + | |||
| + | [[Image:Linux3.png|right]] | ||
| + | |||
| + | Use a terminal program (like HyperTerminal) connected to serial port 1<br\> | ||
| + | Communication parameters: | ||
| + | *115.200 baud | ||
| + | *No parity | ||
| + | *8 databits | ||
| + | *1 stop bit | ||
| + | |||
| + | Turning AMC dipswitch S601-1 ON disables AlphaPro over IP | ||
| + | |||
| + | [[Image:Linux4.png]] | ||
Revision as of 09:21, 17 July 2007
The AlphaCom E runs a [Linux] distribution from MontaVista, kernel version 2.4.<br\> Linux uses a command line interface (CLI).
When do I need to use the Linux Console?
- Ping devices on the network
- File image update
- Access to the file system
The Linux Console can be accessed on two ways:
- Via the ethernet port using ”telnet”
- Via serial port 1
Linux Console - Telnet
Start the Windows command line
Type telnet <AMC IP-adress>
Username: alpha Password: com The Telnet port (23) is by default disabled in the firewall
Linux Console – Serial Port
Use a terminal program (like HyperTerminal) connected to serial port 1<br\> Communication parameters:
- 115.200 baud
- No parity
- 8 databits
- 1 stop bit
Turning AMC dipswitch S601-1 ON disables AlphaPro over IP
