Revision as of 17:18, 18 December 2007

Linux Console

The AlphaCom E runs a [Linux] distribution from MontaVista, kernel version 2.4.<br\> Linux uses a command line interface (CLI).

When do I need to use the Linux Console?

Ping devices on the network
File image update
Access to the file system

The Linux Console can be accessed on two ways:

Via the ethernet port using ”telnet”
Via serial port 1

Linux Console - Telnet

Start the Windows command line

Type telnet <AMC IP-adress>

Username: alpha
Password: com
The Telnet port (23) is by default disabled in the firewall

Linux Console – Serial Port

Use a terminal program (like HyperTerminal) connected to serial port 1<br\> Communication parameters:

115.200 baud
No parity
8 databits
1 stop bit

Turning AMC dipswitch S601-1 ON disables AlphaPro over IP

Some Linux commands

ping <IP-address> (Checks communication against external device)<br\>

ps -A (List running processes)

ls -l (list files)

/sbin/ifconfig (list IP adresses etc of ethernet ports)

netstat -a (list network connections)

The Linux concole runs the "bash" shell. Documentation for Linux commands: die.net/doc/linux

The TST console debug function of the AMCD application can accessed from linux console. Tracing of SIP is also possible.

Access the AMC-IP via FTP Client

AlphaCom E supports FTP protocol (File Transfer Protocol). FTP client (like Windows Commander) looks and acts very much like the Windows Explorer. The FTP ports (20:21) are by default disabled in the firewall.

@@ Line 57: / Line 57: @@
 Documentation for Linux commands: [http://www.die.net/doc/linux/man/ die.net/doc/linux]
-The [[TST console]] debug function of the AMCD application can accessed from linux console.
+The [[TST console]] debug function of the AMCD application can accessed from linux console. [[AlphaCom_SIP_interface#trace_and_debug|Tracing of SIP]] is also possible.
 =Access the AMC-IP via FTP Client=

Difference between revisions of "Linux Console"

From Zenitel Wiki