Difference between revisions of "Linux Console"
From Zenitel Wiki
(→Some Linux commands) |
(→Access the AMC-IP via FTP Client) |
||
| Line 59: | Line 59: | ||
The [[TST console]] debug function of the AMCD application can accessed from linux console. [[AlphaCom_SIP_interface#trace_and_debug|Tracing of SIP]] is also possible. | The [[TST console]] debug function of the AMCD application can accessed from linux console. [[AlphaCom_SIP_interface#trace_and_debug|Tracing of SIP]] is also possible. | ||
| − | |||
| − | |||
| − | |||
| − | |||
[[Category:AlphaCom E Software]] | [[Category:AlphaCom E Software]] | ||
Revision as of 11:27, 24 September 2010
Contents
Linux Console
The AlphaCom E runs a [Linux] distribution from MontaVista, kernel version 2.4.<br\> Linux uses a command line interface (CLI).
When do I need to use the Linux Console?
- Ping devices on the network
- File image update
- Access to the file system
The Linux Console can be accessed on two ways:
- Via the ethernet port using ”telnet”
- Via serial port 1
Linux Console - Telnet
Start the Windows command line
Type telnet <AMC IP-adress>
Username: alpha Password: com The Telnet port (23) is by default disabled in the firewall
Linux Console – Serial Port
Use a terminal program (like HyperTerminal) connected to serial port 1<br\> Communication parameters:
- 115.200 baud
- No parity
- 8 databits
- 1 stop bit
Turning AMC dipswitch S601-1 ON disables AlphaPro over IP
Some Linux commands
- ping <IP-address> (Checks communication against external device)<br\>
- ps -A (List running processes)
- ls -l (list files)
- /sbin/ifconfig (list IP adresses etc of ethernet ports)
- netstat -a (list network connections)
The Linux console runs the "bash" shell. Documentation for Linux commands: die.net/doc/linux
The TST console debug function of the AMCD application can accessed from linux console. Tracing of SIP is also possible.