Actions

Difference between revisions of "Logging into an Zenitel IP Device"

From Zenitel Wiki

Line 37: Line 37:
 
#Click '''Close''' again to close the network adapter properties.
 
#Click '''Close''' again to close the network adapter properties.
  
Once you’ve completed the steps, you can open your web browser and try loading a website to see if the configuration works.
+
[[File:PC StaticIP.PNG|thumb|left|500px|Setting a Static IP Address]]
 +
<br style="clear:both;" />
 +
 
 +
Once you’ve completed the steps, you can open your web browser and try logging into the station.
  
  

Revision as of 16:51, 18 March 2019

APS.png
Connect the PC and the station to a network switch, and open a webbrowser to log on to the station

Access the web interface of an IP station (or any Vingtor-Stentofon IP device) with a standard web browser:

  1. Open a web browser
  2. In the browser’s address bar, type the station IP address and press the ENTER key
- The station login page will be displayed.
The login page


To log into the station:

  1. Click on one of the login options
  2. Enter the default User name: admin
  3. Enter the default Password: alphaadmin

The Station Information page will now be displayed, showing the IP station configuration and status.


Default IP addresses

  • The INCA series of stations has default IP address 169.254.1.100.
  • The Turbine series of stations are set to obtain IP address automatically from the network (DHCP). If no DHCP server present, it will get a random 169.254.x.x address The station will speak its own IP address when pressing the Call button, a Digit key a DAK key or activate an Input of the station.


How to set a static IP Address on your Windows 10 computer

In order to access the web interface of the station, your computer must be in the same subnet range at the station.

  1. Open Control Panel.
  2. Click on Network and Internet.
  3. Click on Network and Sharing Center.
  4. On the left pane, click the Change adapter settings link.
  5. Right-click the network adapter and select Properties.
  6. Select the Internet Protocol Version 4 (TCP/IPv4) option.
  7. Click the Properties button.
  8. Select the Use the following IP address option.
  9. Set the IP address (e.g., 169.254.1.90).
  10. Set the Subnet mask. Usually, on a home network, the subnet mask is 255.255.255.0.
  11. Set the Default gateway. This address is typically your router’s IP address (e.g., 169.254.1.1).
  12. Click OK.
  13. Click Close again to close the network adapter properties.
Setting a Static IP Address


Once you’ve completed the steps, you can open your web browser and try logging into the station.