Actions

Difference between revisions of "Mobile radio interface"

From Zenitel Wiki

m (FBSAR)
m
Line 2: Line 2:
 
[[File:Mobile radio analog.PNG|thumb|500px|Interface to non-selective mobile radio system using IPARIO]]
 
[[File:Mobile radio analog.PNG|thumb|500px|Interface to non-selective mobile radio system using IPARIO]]
  
The AlphaCom can be interfaced to non-selective mobile radio systems via an FBSAR board, an IP-ARIO or through a Turbine Extended kit (TKIE), hereafter called the interface. The audio coming from the mobile radio gateway is distributed to the intercom stations in the AlphaCom by using the simplex conference feature. A user can listen to the radio conference by dialing the appropriate conference directory number 8201 - 8250. Any number of stations can listen in. The M-key of the station works as a PTT button. A user can press the M-key to talk back to the radio and to all other stations listening to that radio conference. When the M-key is pressed an RCO is operated. The RCO triggers a relay, which is used for keying the radio transmitter. Restrictions can be set on which stations are allowed to do talkback, and which stations are allowed to listen only.
+
The AlphaCom can be interfaced to non-selective mobile radio systems via an [[FBSAR - Audio Interface Unit|FBSAR board]], an [[IP-ARIO]] or through a Turbine Extended kit (TKIE), hereafter called the interface. The audio coming from the mobile radio gateway is distributed to the intercom stations in the AlphaCom by using the [[Simplex Conference|simplex conference]] feature. A user can listen to the radio conference by dialing the appropriate conference directory number 8201 - 8250. Any number of stations can listen in. The M-key of the station works as a PTT button. A user can press the M-key to talk back to the radio and to all other stations listening to that radio conference. When the M-key is pressed an [[RCO]] is operated. The [[RCO - Remote Control Output|RCO]] triggers a relay, which is used for keying the radio transmitter. Restrictions can be set on which stations are allowed to do talkback, and which stations are allowed to listen only.
  
 
== Connections==
 
== Connections==
Line 12: Line 12:
  
 
===IP-ARIO===
 
===IP-ARIO===
*The IP-ARIO provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.
+
*The [[IP-ARIO]] provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.
 
[[Image:MobileRadio-IPArio-WiringDetails2.png|thumb|left|300px|Connections between mobile radio and IPARIO. Image shows relay 1 used for transmitter keying.]]
 
[[Image:MobileRadio-IPArio-WiringDetails2.png|thumb|left|300px|Connections between mobile radio and IPARIO. Image shows relay 1 used for transmitter keying.]]
 
[[File:MobileRadio-IPArio-Overview with Details.png|thumb|center|300px|Example: Connection between Motorola GM340 and IP-ARIO]]
 
[[File:MobileRadio-IPArio-Overview with Details.png|thumb|center|300px|Example: Connection between Motorola GM340 and IP-ARIO]]
Line 18: Line 18:
  
 
===FBSAR===
 
===FBSAR===
*The FBSAR board provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.  
+
*The [[FBSAR|FBSAR board]] provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.  
*Towards the AlphaCom the FBSAR board is connected to a free [[ASLT]] subscriber port with a-, b-, c- and d-wires. An RCO signal (separate e-wire) is required for the relay operation. For easy installation '''use relay K2''' for keying the transmitter (PTT). The FBSAR must be [[Powering Additional Equipment|powered by 24VDC from the exchange]].
+
*Towards the AlphaCom the [[FBSAR|FBSAR board]] is connected to a free [[ASLT]] subscriber port with a-, b-, c- and d-wires. An RCO signal (separate e-wire) is required for the relay operation. For easy installation '''use relay K2''' for keying the transmitter (PTT). The [[FBSAR - Audio Interface Unit|FBSAR]] must be [[Powering Additional Equipment|powered by 24VDC from the exchange]].
 
*There are four jumpers on the FBSAR, S1 to S4, they should all be set in the "down" position (2-3).
 
*There are four jumpers on the FBSAR, S1 to S4, they should all be set in the "down" position (2-3).
 
*Two potentiometers on the FBSAR allows you to adjust the input and output signal levels
 
*Two potentiometers on the FBSAR allows you to adjust the input and output signal levels

Revision as of 14:45, 25 September 2018

AlphaCom icon 300px.png
Interface to non-selective mobile radio system using IPARIO

The AlphaCom can be interfaced to non-selective mobile radio systems via an FBSAR board, an IP-ARIO or through a Turbine Extended kit (TKIE), hereafter called the interface. The audio coming from the mobile radio gateway is distributed to the intercom stations in the AlphaCom by using the simplex conference feature. A user can listen to the radio conference by dialing the appropriate conference directory number 8201 - 8250. Any number of stations can listen in. The M-key of the station works as a PTT button. A user can press the M-key to talk back to the radio and to all other stations listening to that radio conference. When the M-key is pressed an RCO is operated. The RCO triggers a relay, which is used for keying the radio transmitter. Restrictions can be set on which stations are allowed to do talkback, and which stations are allowed to listen only.

Connections

TKIE

  • The TKIE provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.
TKIE connections for interface with mobile radio. Image shows relay 1 (output 7) used for transmitter keying.
Example: Connection between Motorola DM4xxx and TKIE-2.


IP-ARIO

  • The IP-ARIO provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.
Connections between mobile radio and IPARIO. Image shows relay 1 used for transmitter keying.
Example: Connection between Motorola GM340 and IP-ARIO


FBSAR

  • The FBSAR board provides signals for audio out, audio in and a contact closure for keying of the radio transmitter. These signals are connected to the mobile radio system.
  • Towards the AlphaCom the FBSAR board is connected to a free ASLT subscriber port with a-, b-, c- and d-wires. An RCO signal (separate e-wire) is required for the relay operation. For easy installation use relay K2 for keying the transmitter (PTT). The FBSAR must be powered by 24VDC from the exchange.
  • There are four jumpers on the FBSAR, S1 to S4, they should all be set in the "down" position (2-3).
  • Two potentiometers on the FBSAR allows you to adjust the input and output signal levels
Interfacing to Mobil Radio using the FBSAR board


AlphaPro programming

The IP-ARIO and the TKIE must be configured to register to the AlphaCom through the IP network.

IP-ARIO Audio License

In AlphaPro, Users & Stations window, click the Station Type tab. Under IP-ARIO, enable the Request Audio License flag.

Enable IP-ARIO Audio License


Default Speaker

The interface must be set as a 'Default Speaker' in the conference. From the AlphaPro main menu select the button 'Simplex Conference', pick a free conference from the list box, and set the interface as a 'Default Member'. Check the flag "Default Member is Default Speaker".

Set the interface as 'Default Speaker' in a Simplex Conference


RCO Operation

One relay is used for keying the transmitter. The relay in the interface is controlled by the RCO command in the event handler. The relay outputs of the interface needs to be mapped to a logical RCO.

Example: Mapping logical RCO 1 to ASLT port 14 for FBSAR
Example: Mapping logical RCO 1 to IP-ARIO/TKIE relay (output 7)


The RCO is configured in the Event Handler. In the Users & Stations window, highlight the interface in the listbox, and select the button Events. Press Insert to create an event with the following parameters (here RCO 1 is used as an example):

Event Owner: The interface
Event type: 1 – Audio
Subtype: 64
When change to: ON or OFF
Action: RCO 1
Event for operating the RCO


Set restrictions on Talkback (optional)

Each Simplex Conference has a 'Minimum Talk Priority' setting, with four levels available:

  • Low (default)
  • Medium
  • High
  • Alarm

Each station has a similar 'SX Conf. Talk Priority' setting (Users & Stations -> User Preferences tab) which must be higher than the setting of the conference, else the station can only listen to that conference.

Restriction on talkback is controlled by the 'SX Conf. Talk Priority' setting


All conferences are by default set to "'Minimum Talk Priority' = Low", and all stations are by default set to "Medium". I.e. all stations are allowed to do talkback.

Related articles