Mooring Conference

Requirements:

1. Everybody shall hear the Active User
2. When a user presses the M-key he will become the Active User. Active User doesn't have to keep the M-key pressed while talking
3. The Bridge shall be able to talk into the conference by pressing the M-key. When the M-key is released the Active User shall continue to talk without pressing the M-key
4. When next user presses M-key, he shal become the Active User
5. The Bridge shall from the DAK panel be able to select who should be the Active User
6. The DAK panel shall indicate on LED's who is participating in the conference, and who is Active User.
7. The Bridge shall be able to disconnect the confrence by pressing a DAK key
8. Each user shall be able to disconnect from the conference by dialing a code, e.g. 8200
9. It shall be possible to integrate a mobile radio system. The radio shall be able to talk into the conference when squelsh signal is present

• Include all conference participants, except the Bridge and the Radio I/F FBSAR (if radio is connected), in UDP group 1
• Include the Bridge (and Radio I/F if connected) in UDP group 2

- A user talks into the conference by pressing the M-key. When the M-key is released, the users in UDP 1 shall remain the active talker. This event will force the user to feed the conference when M is released, and the directory number of the active user is stored in UDD 500.

In AlphaPro, Exchange & System -> Events, insert a new event with the following parameters:

Event Owner:	A station or an UDP group
Event type:	31 - M-key
Subevent:	1 (M key status when station is idle)
When change to:	ON (M key pressed)
When related to:	(not used)
Action:	$MAILQ_NAVIG L%1.dir 8