Difference between revisions of "MultiModule over IP: Master module cannot find the Slave module"
From Zenitel Wiki
(New page: Q: MultiModule over IP: After having converted an AlphaCom to an AlphaCom E, the Master module cannot find the Slave module.<br> A: In AlphaPro, '''Exchange & System''' > '''Serial Ports''...) |
(No difference)
|
Revision as of 09:36, 13 February 2009
Q: MultiModule over IP: After having converted an AlphaCom to an AlphaCom E, the Master module cannot find the Slave module.
A: In AlphaPro, Exchange & System > Serial Ports select Inter Module protocol. Make sure Port Type = N/A, and that the Enable flag is unchecked.