Difference between revisions of "Network Object Reference"
From Zenitel Wiki
| Line 4: | Line 4: | ||
| − | NOTE: AlphaCom 08.00 have a fixed size internally of 6 bytes for NET_OBJ_REF fields! | + | NOTE: AlphaCom 08.00 have a fixed size internally of 6 bytes for NET_OBJ_REF fields! |
<header> <contents….> | <header> <contents….> | ||
| − | Where | + | Where |
| − | + | <header> UINT1 defines both the length and the format: | |
| − | <length> 4 bits. The length of the representation not including the first byte itself. | + | <length> 4 bits. The length of the representation not including the first byte itself. |
| − | <format> 4 bits. The format of the representation. See the table below. | + | <format> 4 bits. The format of the representation. See the table below. |
| − | + | <contents> See the table below. | |
Revision as of 14:52, 21 June 2007
All exchange resources can be referenced either by directory numbers, or “physical numbers”. This is a challenge for the data protocol, as directory numbers can vary in size, and some resources have physical addresses with multiple parts. The NET_OBJ_REF is a “variant record” which has a header with byte count plus a type field. The rest of the information is then according to the type field and length. The total length can vary from 1 to 16 bytes.
NOTE: AlphaCom 08.00 have a fixed size internally of 6 bytes for NET_OBJ_REF fields!
<header> <contents….>
Where <header> UINT1 defines both the length and the format: <length> 4 bits. The length of the representation not including the first byte itself. <format> 4 bits. The format of the representation. See the table below. <contents> See the table below.