Actions

Difference between revisions of "Physical number 5 and 6 (AlphaCom E7)"

From Zenitel Wiki

(New page: Describe here how to change port 5 and 6 to stations.)
 
Line 1: Line 1:
Describe here how to change port 5 and 6 to stations.
+
Connector 5 and 6 on the first ASLT line board are enabled for program distribution by default.
 +
Additional programs can also be connected to individual ASLT ports via the interface board [[FBSAR]], 6 programs per board.
 +
 
 +
* To set physical number 5 and/or 6 to be used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1:
 +
:* The jumpers P5 and P6 are set to pos 2-3.
 +
:* The potmeters P5 and P6 are used to adjust the input level.
 +
 
 +
* To set physical number 5 and/or 6 to be used as normal subscriber ports:
 +
:* Set jumpers 5 and 6 to pos 1-2
 +
:* In AlphaPro, select Exchange & System -> Boards
 +
:* Change the port setting from ‘Audio program feed’ to ‘Default’
 +
:* Reset the exchange

Revision as of 14:21, 4 February 2009

Connector 5 and 6 on the first ASLT line board are enabled for program distribution by default. Additional programs can also be connected to individual ASLT ports via the interface board FBSAR, 6 programs per board.

  • To set physical number 5 and/or 6 to be used as program distribution inputs on line c-d when an ASLT board is placed in board pos. 1:
  • The jumpers P5 and P6 are set to pos 2-3.
  • The potmeters P5 and P6 are used to adjust the input level.
  • To set physical number 5 and/or 6 to be used as normal subscriber ports:
  • Set jumpers 5 and 6 to pos 1-2
  • In AlphaPro, select Exchange & System -> Boards
  • Change the port setting from ‘Audio program feed’ to ‘Default’
  • Reset the exchange