Difference between revisions of "Physical number 5 and 6 (AlphaCom E7)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
In the AlphaCVom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default. | In the AlphaCVom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default. | ||
| − | + | [[image:ACE7 backplane.jpg]] | |
* To set physical number 5 and/or 6 to be used as normal subscriber ports: | * To set physical number 5 and/or 6 to be used as normal subscriber ports: | ||
:* Set jumpers 5 and 6 to pos 1-2 | :* Set jumpers 5 and 6 to pos 1-2 | ||
Revision as of 09:45, 13 August 2009
In the AlphaCVom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default.
- To set physical number 5 and/or 6 to be used as normal subscriber ports:
- Set jumpers 5 and 6 to pos 1-2
- In AlphaPro, select Exchange & System -> Boards
- Change the port setting from ‘Audio program feed’ to ‘Default’
- Reset the exchange