Difference between revisions of "Physical number 5 and 6 (AlphaCom E7)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | In the | + | [[Image:Example.jpg]] |
| − | [[ | + | In the AlphaCom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default. |
| + | [[Image:ACE7 backplane.jpg]] | ||
* To set physical number 5 and/or 6 to be used as normal subscriber ports: | * To set physical number 5 and/or 6 to be used as normal subscriber ports: | ||
:* Set jumpers 5 and 6 to pos 1-2 | :* Set jumpers 5 and 6 to pos 1-2 | ||
Revision as of 09:47, 13 August 2009
File:Example.jpg
In the AlphaCom E7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default.
- To set physical number 5 and/or 6 to be used as normal subscriber ports:
- Set jumpers 5 and 6 to pos 1-2
- In AlphaPro, select Exchange & System -> Boards
- Change the port setting from ‘Audio program feed’ to ‘Default’
- Reset the exchange