Difference between revisions of "Play DAK Feature"
From Zenitel Wiki
(→Play DAK programmed from DAK string) |
(→Play DAK programmed from DAK string) |
||
| Line 13: | Line 13: | ||
0-9 Digits | 0-9 Digits | ||
# * Signaling available during trunk connection | # * Signaling available during trunk connection | ||
| − | + | w Pause for 0,5 Second | |
W Pause for 1 Second | W Pause for 1 Second | ||
Revision as of 14:49, 4 February 2009
Contents
Programming of DAK sequences with single digit dialing and wait states
Available from amcd 1043x0521
Play DAK programmed from DAK string
By using the DAK "T" parameter a 18 digit string can be programmed.
Sequence syntax:
0-9 Digits # * Signaling available during trunk connection w Pause for 0,5 Second W Pause for 1 Second
Example DAK string as programmed in AlphaPro: <br\>
Description: <br\> Get line out "01" <br\> Wait 1 Sec <br\> Dial Tellog pin code "123#"<br\> Wait 2 Sec <br\> Dial Zenitel "40002500". <br\>
Timing of play speed
Default digit step time is 200 ms. Configurable from NVRAM:
85 &000874 .ex_profile.timeouts.play_dak_time = 2 (0x0002) <br\>
Play DAK by Data Protocol
If longer strings are needed the Station DAK key as RCI event trigger can be used for sending the play dak $PD data protocol message.
Restriction
Maximum 50 simultaneous DAK Play functions can be activated at the same time in one node.
A description of "first" edition of the Play DAK function from 10x43x520 is found here:
Play DAK - "Old version" only on 10x43x520