Difference between revisions of "Play DAK Feature"
From Zenitel Wiki
(→Play DAK by Data Protocol) |
(→Play DAK by Data Protocol) |
||
| Line 37: | Line 37: | ||
===Play DAK by Data Protocol === | ===Play DAK by Data Protocol === | ||
| − | If longer strings are needed the [[Station DAK key as RCI (Event Type)|Station DAK key as RCI]] event trigger can be used for sending the [[PLAY_DAK |PLAY_DAK $PD]] data protocol message. | + | If longer strings are needed the [[Station DAK key as RCI (Event Type)|Station DAK key as RCI]] event trigger can be used for sending the [[PLAY_DAK |PLAY_DAK ($PD)]] data protocol message. |
===Restriction=== | ===Restriction=== | ||
Revision as of 11:43, 13 October 2009
Contents
Programming of DAK sequences with single digit dialing and wait states
Available from AMC 10.50
Play DAK programmed from DAK string
By using the DAK "T" parameter a 18 digit string can be programmed.
Sequence syntax:
0-9 Digits # * Signaling available during trunk connection w Pause for 0,5 Second W Pause for 1 Second
Example DAK string as programmed in AlphaPro: <br\>
Description: <br\> Get line out "01" <br\> Wait 1 Sec <br\> Dial Tellog pin code "123#"<br\> Wait 2 Sec <br\> Dial Zenitel "40002500". <br\>
Timing of play speed
Default digit step time is 200 ms. Configurable from NVRAM:
85 &000874 .ex_profile.timeouts.play_dak_time = 2 (0x0002) <br\>
Play DAK by Data Protocol
If longer strings are needed the Station DAK key as RCI event trigger can be used for sending the PLAY_DAK ($PD) data protocol message.
Restriction
Maximum 50 simultaneous DAK Play functions can be activated at the same time in one node.